Senior Member
Location: Bishops Stortford
Posts: 1,250
I'm Chris.
Does this exist.
I am looking to create a subwoofer system using a very specific set of requirements for the sub amplifier, but does such a thing exist?
1. High level inputs from speaker terminals of main amp.
2. DSP for maximum flexibility on the low pass filter
3. Amplification should be best SQ but probably can cope with 50 W/channel minimum. (Class A/B or D Class?).
4. No thump at turn on.
Any ideas.
Source
SW1X Universal Music Server UMS I Signature with Power Supply Unit PSU I Signature
SW1X USB II
SW1X DAC III Special
Audiolab 6000 CDT transport
Amps
Pre amps -- Hi fi Collective twin mono ladder stepped attenuator, with Charcroft Z-foil and silver wired. And First Watt B1 active no gain buffer.
Power amps -- Welborne 45 SET monoblocks 1.8W / Decware Taboo 6W / Elekit 300B TU-8600SVK plus further improved components 9W / ICE Power 1000W
Speakers
Highly modified Endorphin P17 open baffle speakers containing both vintage and modern alnico drivers and paper cones. All silver wired - 8" Cube Audio FC8 full range drivers and vintage 15" Altec VOTT 416 bass drivers. All sat on Townsend Audio Podium seismic isolation platforms.
BK Electronics XLS400FF Sub.
Cabling
Silver mains cables, interconnects and speaker cables by SW1X
Headphones
HRT HeadStreamer and SennHeiser HD650 headphones
Senior Member
Location: Bridgend, Wales
Posts: 171
I'm James.
Depends on your budget I guess, but a Dynaudio Sub 6 should fit the bill.
Nottingham Analogue Spacedeck / Kuzma Stogi S / Benz Micro Ace S L
Lenco L-75 / Carl Ellis Plinth / Ortofon AS-212 / Ortofon SPU Classic GM E MkII
Ortofon ST-7 SUT / Nick G Modded Lentek Head Amp / Croft RIAA
Cambridge Audio CXU / Theta DS Pro Prime
Classé Model 30 / Luxman M-383
Usher Compass X-719
May contain opinions that others find disturbing.
Posting Permissions
Reply With Quote