Location: HAMPSTEAD
Posts: 1,156
I'm brian.
Location: London/Durham
Posts: 6,878
I'm Lawrence.
Location: Liverpool
Posts: 766
I'm Sandro.
It,s a bit of a long story …
Hey that is why I am posting here
Got them yesterday well actually Martin did
Drop them of at my place and 5 seconds later I wanted them
We put on a bit of Charlie Byrd (CCS 8002 ) either cek the number or … the 45 RPM DDRup and down up and down up and down .... "any reference to the clock work orrange is purely intentional"
and i fell in love
I got a pair of maggies for F. S. (and the paradise) but I have never heard that feeling so good
Things fall apart when listening to Dead can dance The wind that shok the barley (MOFI 2-001)
There is a broken woofer and this is the perfect tune to test for that
At present Martin is in the back bedroom (Toni bedroom) working on it
Toni .jpg
Enclosed a picture of Toni
Location: Liverpool
Posts: 766
I'm Sandro.
PS as posted on same where helse
If you have another pair of Castle speakers laiing around I want them
Location: Liverpool
Posts: 766
I'm Sandro.
was re reading the previous post
It was meant to say
While plaiyng the Bird Drums track "one can ear the stick hitting the drum and then the drum skin moving up and down bla bla bla
I have posted same videos on youtube
Quality is prety low but I am sure I get the idea
Winchester doing Byrd
https://www.youtube.com/watch?v=i2p-L2R9jnE
Broken woofer on the RH hand speaker
https://youtu.be/1fbjg8967G0
Fixed woofer
https://www.youtube.com/watch?v=RSGEncbbq8k
Location: Liverpool
Posts: 766
I'm Sandro.
May take a while for the movies to show You tube need to decide if you little children may get exited
Any way the plan is to do a Martin on the remaining woofer's
While listening the only criticism was from both of us that the tweeters are a bit splashy, metal domes one of which is crushed, so we are waiting for same soft dome to arrive
Location: Liverpool
Posts: 766
I'm Sandro.
Time to start a new project
It is going to be a big one
DSCF2524.jpg
3 box F5 (may not be a turbo)
DSCF2525.jpg
at present 32 X 22mF 40 V PEH200
DSCF2527.jpg
and 4 heat sinks
On those, I managed to get 100 FQA19N20 and already had the FQA12P20, I will fit 4 output devices, as said before it may not be a turbo, as the diodes on the turbo version limit the Bias to around 700 mV and I may be able to push more than 240W dissipation on those heat sinks
Location: Liverpool
Posts: 766
I'm Sandro.
First lay out
Buss bar for the ground 38 X 380 X 5
and the 4 buss bar's for the rail voltage's
DSCF2528.jpg
The chokes will be 1Kg of 2.62 mm Od cooper about 5.4 CSA
DSCF2529.jpg
Rough size for now 300 mm wide 400 long 220 hi
DSCF2530.jpg
It is a bit tight but it all depends on the size of the Chokes I may try doing common mode chokes
positive and negative rail's ,2 wires, wound together around the same core
From past experience it is going to be a 2 man job
DSCF2531.jpg
Location: Liverpool
Posts: 18
I'm Martin.
Nice! Looks like it's going to be a big boy.
Location: South Yorkshire
Posts: 2,683
I'm Andre.
Will the tin of Tomatoes add a certain flavour to the sound?