The Bug is back

[Bksabath]

DSCF2556.jpg

Ready for gerbers

[Bksabath]

DSCF2559.jpg Just started whit the box construction it is 3 mm Aluminium plate 4 pieces 300 X 400 for the monoblock V 3

It does not look like much and has a few scratches straight out of the bag once drilled it is going to be electrical etched and anodised



And the chokes between the capacitors banks nothing more than a 0.076 Homes resistor after all
DSCF2558.jpg

The water clear resin is curing pretty well may even put a few LED in those

[Bksabath]

DSCF2559.jpgDSCF2561.jpgDSCF2562.jpg

Case construction
Sinks 220 X 400 X 86
Plate 300X400 X 3
Angle 1/2 in 25 mm may be better

[Bksabath]

DSCF2568[1].jpgDSCF2569[1].jpg

The back panels

Just put the plugs the other way around for left and right channels

[Bksabath]

DSCF2570.jpg
Building the enclosures
this is a 3 box build
Left and right amplifiers and separate enclosure for the transformers
DSCF2571.jpg
The speaker protection is mounted directly on the speaker terminal
DSCF2572.jpg
Back panel whit same pretty nice silver plated CHK post
DSCF2573.jpg
They are going to be bigish as the sinks are 400 X 220 X 86
DSCF2574.jpg
The boards are designed for a stereo set and designed around the Amplimo speakers relay

[Bksabath]

Just had the aluminium panel anodised
DSCF2575.jpg
DSCF2576.jpg

DSCF2577.jpgDSCF2579.jpg

And the front granite tiles cut and polished
DSCF2580.jpg

Those just need the holes for fixing and for the speaker protection LED

Close up I am really pleased whit how it is turning out and must mention Aleo Plating in Liverpool for the fantastic anodising job

[Hifidog]

a thing of beauty! They look even better in the flesh.

[Bksabath]

I still think that yours are really dobby Horroshow (what not seen clockwork orange ?)


DSCF2582.jpgDSCF2583.jpg

I have been making up the capacitors banks
I am going for only 180,000 uF on each rail
DSCF2586.jpgDSCF2592.jpg
Ground buss bar cut polished and silver plated

viddy that turn up pretty horroshow as well

DSCF2595.jpg

[Hifidog]

the plating looks perfect. Is it silver?

[Bksabath]

yes spezial thing

Can you lend me your silver bars maybe we could try to cooper plate them as copper plated silver should not suffer from skin effect

Need to ask our mate that used to design particle accelerators and partner to pop around for a listen