+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Record flattening

  1. #1
    Join Date: Jan 2016

    Location: Shenfield

    Posts: 404
    I'm Slav.

    Default Record flattening

    Pulled out 96's "Mercury Falling " and to my surprise is warped , not massively but enough to make me worried if played .
    I looked up possible options and Analogue Seduction offers record flattening service , anyone got any experience with ?

  2. #2
    Join Date: May 2016

    Location: Notts

    Posts: 1,612
    I'm Geoff.

    Default

    Large pot of warm water. Place on top of record with pillow case between record and pot and leave to cool. Repeat increasing heat until satisfied with result.

    Alternative is to press record between two sheets of glass and load heavy weights on top, ideally books. This can take a long time to work, even weeks.

    Geoff

  3. #3
    Join Date: Oct 2015

    Location: Pulborough, West Sussex, UK

    Posts: 968
    I'm Ian.

    Default

    I've used this method a couple of times with good results

    https://youtu.be/ljRaBiZLtGk
    Turntable
    Toshiba SR-370/Mission 774/Ortofon Quintet Black
    CD
    Cambridge CXC transport/Musical Fidelity X-DAC/Musical Fidelity X-10 V3 tube buffer
    Amplifier
    Nakamichi CA-5E pre-amp/Proton AA-1150 DMC power amp
    Speakers
    Mordaunt Short Signifer
    Cables
    Klotz MC5000+MS Audio/Sommer Carbokab+MS Audio/NVA LS5
    Headphones
    Sennheiser HD600/Sennheiser HD650/Koss Pro4 A

  4. #4
    Join Date: Apr 2015

    Location: Central Virginia

    Posts: 1,254
    I'm Russell.

    Default

    Quote Originally Posted by Sherwood View Post
    Large pot of warm water. Place on top of record with pillow case between record and pot and leave to cool. Repeat increasing heat until satisfied with result.

    Alternative is to press record between two sheets of glass and load heavy weights on top, ideally books. This can take a long time to work, even weeks.

    Geoff
    It only takes a little heat to flatten a record, two sheets of glass and a hair dryer will work well, use as little heat as possible, and stop the instant it flattens out. Trying to flatten a cold record will most likely cause cracks.

    The guy in the video in the next post warns of burning the record and flattening the grooves, youíd really be using way to much heat if that happens. A little common sense goes a long way here.

    Russell

  5. #5
    Join Date: May 2012

    Location: Dagenham Essex

    Posts: 8,119
    I'm I'mteachingmarcotheartofpishanto.

    Default

    Anyone tried one of these ?


    1200px-Ruthemeyer_Miss-Elli_vr1.jpg



    Music , fills the gaps between silence !

    TAT Sale post Leader " Marcos Mentor "

    Also a pishanto specialist confirmed by Head Daftee

    Real name " Allen " or "Zoomer NutĒ, ďNumpty NapperĒ.

    ĪĪ KEEP IT REEL

  6. #6
    Join Date: May 2016

    Location: Notts

    Posts: 1,612
    I'm Geoff.

    Default

    Quote Originally Posted by alphaGT View Post
    It only takes a little heat to flatten a record, two sheets of glass and a hair dryer will work well, use as little heat as possible, and stop the instant it flattens out. Trying to flatten a cold record will most likely cause cracks.

    The guy in the video in the next post warns of burning the record and flattening the grooves, you’d really be using way to much heat if that happens. A little common sense goes a long way here.

    Russell
    That is why the warm water in pot works so well. There is a reservoir of heat energy that dissipates slowly, and the pillow case allows for a slow build up of warmth rather than full on heat.
    Last edited by Sherwood; 30-04-2018 at 19:43. Reason: typo

  7. #7
    Join Date: Feb 2010

    Location: Berkshire, UK

    Posts: 3,246
    I'm Tom.

    Default

    Quote Originally Posted by Sherwood View Post
    That is why the warm water in pot works so well. Their is a reservoir of heat energy that dissipates slowly, and the pillow case allows for a slow build up of warmth rather than full on heat.
    Great idea this. Going to try it out next weekend.
    Main: Speakers 'RFC' Tannoy Canterburys / custom crossovers with Tannoy ST25 supertweeters; Amp - Radford STA100; Pre EAR 912; Vinyl: Thorens TD124 MkII + Ikeda IT345-CR1 9 inch and Ikeda IT-407 12 inch tonearms; Cartridges Stereo - Miyajima Madake, Miyajima Takumi, Ikeda 9TT, SAEC/Excel C3; Mono - Miyajimas - Zero 0.7, Premium 1.0, Edison '78' 4.0 conical, and Shure M44 strapped for mono with several Expert Stylus conicals for different eras of 78s; Phono stage and SUT from EAR 912 + Miyajima ETR-Mono SUT; Esoteric Sound Re-Equalizer for equalisation of early mono and 78, switchable in from tape loop; Digital: Audio Note CDT2/II transport, heavily modded AN Kit DAC + Mutec MC3+USB.

    Study: Speakers - Tannoy DC6; Amp: Pass Aleph 'Mini'; tube preamp - Gate Audio tube; Vinyl: Garrard 401 with AT1503 Mk I tonearm and vintage Ortofon SL-15e with matching Ortofon 2-15k SUT; Phono Stage from Gate Audio preamp; Digital - Trichord Genesis III CDP + Arcam rBlink.

  8. #8
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 21,955
    I'm Martin.

    Default

    Quote Originally Posted by Sherwood View Post

    Alternative is to press record between two sheets of glass and load heavy weights on top, ideally books. This can take a long time to work, even weeks.

    Geoff
    I tried that and it worked like a charm. I left it at least a week, might have been longer. A seriously warped record, warped from new, became completely flat and playable. Until a few months later when I went to play it again and it had reverted back to its original shape.
    Martin



    Current Lash Up:

    Technics SLP1200 CD Player * NVA P90SA passive pre / Krell KSA50S Power amp * JM Lab Electra 926 loudspeakers *


    'This is the sort of music I'd be listening to if I was going shopping for a training bra.'

  9. #9
    Join Date: Apr 2015

    Location: Central Virginia

    Posts: 1,254
    I'm Russell.

    Default

    Quote Originally Posted by Sherwood View Post
    That is why the warm water in pot works so well. Their is a reservoir of heat energy that dissipates slowly, and the pillow case allows for a slow build up of warmth rather than full on heat.
    Yes I can see the logic in the warm water method. One important step is to remove all heat the instant it returns to flat. You could put something flat on top at that time, that is not hot, to be sure it remains flat as it cools. But even that may not be necessary?

    Iíve got one album right now that has developed a warp. My Jethro Tull, Auqulung. Iím not sure how that happened? Itís stored with the rest of my records, which are not warped. I suspect it has always been there, but over the years Iíve noticed that sometimes it seems very warped, and other times itís only slightly warped. Why? Perhaps the jacket is screwy, and is applying force on the record depending on humidity? Or perhaps when itís warm the record expands and makes it worse?

    Sometimes itís just slight and the needle will track it fine, and other times the needle will get airborne as it passes over it for about two or three rotations before it settles in and tracks. Iíve made a habit of dropping the needle about 10 grooves from the beginning to spare the needle the wear and tear. It would be a good candidate to experiment on, and see if I can flatten it with warm water. The three Iíve made flat before have stayed flat as far as I know. But I used two sheets of glass and a hair dryer on those. I didnít heat the glass, I heated the record, and laid the glass on top once it was warm enough to flatten out. That was years ago, like 25 years ago maybe? And I had seen an article about two sheets of glass with the record in between, placed in the oven at its lowest setting. That sounded risky to me, so I thought of the hair dryer method. But apparently others have had success with the oven method? As always, thereís more than one way to skin a cat.

    Russell

  10. #10
    Join Date: Apr 2016

    Location: souf east for work

    Posts: 988
    I'm paul.

    Default

    Quote Originally Posted by Audio Al View Post
    Anyone tried one of these ?


    1200px-Ruthemeyer_Miss-Elli_vr1.jpg



    is that from bay city?
    Sony STR 6055 Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus Zu omen

    Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons Najda dsp as dac Akai AM-U02 Jvc QL-A51 direct drive turntable
    SAE1000LT leema sub. JVC Z4S cart is in the house

    Garage system another Sony receiver, cassette deck and full range drivers in free air


    System components are subject to change without warning and at the discretion of the owner.

+ Reply to Thread
Page 1 of 2 12 LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •