+ Reply to Thread
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 55

Thread: Another change in direction

  1. #1
    Join Date: May 2009

    Location: Southampton

    Posts: 451
    I'm Rob.

    Default Another change in direction

    Thought I'd try a SIT amp project,lots of info on DIY Audio forum under the Nelson Pass bit.
    Finished them tonight in a prototype form driving some AER MD3's and the big Parasound A21 driving the bass cabs,sounding very sweet,anyone after a nice AN 2A3 amp


  2. #2
    Join Date: May 2008

    Location: Surrey

    Posts: 7,103
    I'm Rob.

    Default

    Rob, Is this configured in the same way as the De-Lite?

    I tried to build a De-Lite. For some inexplicable reason (given such a simple circuit) it did not work. I keep meaning to have another crack at it.

    Rob.
    Buy Bose...And get your parking validated!.

    https://youtu.be/ZCBe7-6rw4M

    No Highs...No Lows....It Must Be Bose!

  3. #3
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Wow - that's what you call valves!! What kind are those, Rob?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  4. #4
    Join Date: Feb 2008

    Location: North East UK

    Posts: 6,358
    I'm InSpace.

    Default

    Light bulbs!
    Shian7
    --------------------------------------------------------

    Kudakutemo
    kudakutemo

    ari mizu-no tsuki

    Though it be be broken -
    broken again - still it's there:
    the moon on the water.

    - Choshu.

  5. #5
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    That's exactly what they look like!!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  6. #6
    Join Date: Mar 2008

    Location: Galashiels

    Posts: 13,669
    I'm inthescottishmafia.

    Default

    That's what they are dude.

  7. #7
    Join Date: Jul 2010

    Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy

    Posts: 11,166
    I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.

    Default

    Yes, light bulbs used as load resistors
    Bests, Mark



    "We must believe in free will. We have no choice" Isaac Bashevis Singer

  8. #8
    Join Date: Feb 2008

    Location: North East UK

    Posts: 6,358
    I'm InSpace.

    Default

    Marco, it's a solid state amp!
    Shian7
    --------------------------------------------------------

    Kudakutemo
    kudakutemo

    ari mizu-no tsuki

    Though it be be broken -
    broken again - still it's there:
    the moon on the water.

    - Choshu.

  9. #9
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Lol - soz, ah didnae know...

    First time I've seen that!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  10. #10
    Join Date: May 2009

    Location: Southampton

    Posts: 451
    I'm Rob.

    Default

    Quote Originally Posted by Puffin View Post
    Rob, Is this configured in the same way as the De-Lite?

    I tried to build a De-Lite. For some inexplicable reason (given such a simple circuit) it did not work. I keep meaning to have another crack at it.

    Rob.
    yep I beleive it is,but using the 2SK82 instead,surprisingly my effort worked first time,have a digital meter on the fronts to dial in that sweetspot.

    Hey Marco the bulbs are branded Sylvania

+ Reply to Thread
Page 1 of 6 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •