And now for something completely different:
The hinge on the toilet seat broke this morning. Popped out to a nearby building hardware store, and ten minutes later the seat and cover were replaced.
Barry
At last, my field of expertise! A bit clueless with hifi, but I know a good toilet seat when I sit on one. I got tired of annually replacing Anita's £10 bargain bogseats, so I went out and splashed out 30-odd quid on a Beamis jobbie. Six years later it's still going strong
I just dropped in, to see what condition my condition was in
T/T: Inspire Monarch, X200 tonearm, Ortofon Quintet Blue. Phono: Project Tube Box CD: Marantz CD6006 (UK Edition); Amp: Musical Fidelity A5 Integrated.
Speakers: Zu Omen Def, REL T9i subwoofer. Cables: Atlas Equator interconnects, Atlas Hyper 3.0 speaker cables
T'other system:
Echo Dot, Amptastic Mini One,Arcam A75 integrated, Celestion 5's, BK XLS-200 DF
A/V:
LG 55" OLED, Panasonic Blu Ray, Sony a/v amp, MA Radius speakers, REL Storm sub
Forget the past, it's gone. And don't worry about the future, it doesn't exist. There is only NOW.
KICKSTARTER: ENABLING SCAMMERS SINCE 2009
My downstairs cludgie
Lol@'jobbie'... No pun intended, eh?
This is what graces the botty of the great one: https://www.ukbathroomstore.co.uk/to...eat-tsgra101sc
[Basically, it goes with our black & white 'art deco' inspired bathroom]. Perish the thought of allowing plastic anywhere near my delicate wee bum!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
https://www.ukbathroomstore.co.uk/to...eat-tsgra101sc
They don't last any longer than say a £30 seat. I know to my cost, although the one we had was of a different colour. The problem is they are made of MDF, not a solid hardwood.
Barry
I think the base is pine, with a 'posh' hardwood veneer of choice, so still made of solid wood.
And besides, you know how long we've had our black and white bathroom for, with said seat (must be a good 15 years now) and it's still going strong... Plus, aside from that, wood is a damn sight warmer than plastic to put you bum on!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Taken from the www.ukbathroomstore.co.uk website:
Construction: Lifestyle - Foil finish bonded onto MDF Realwood - Use natural real wood solid timber or veneers.
I've never found a loo seat too cold to sit on, unlike the electrically heated seats favoured by the Japanese. Horrible things - I always switched them off.
Barry
Yes, but what do they mean by "MDF realwood", which is somewhat of an oxymoron, and the description afterwards is a little ambiguous to say the least...
It doesn't really matter though as Del and I hate plastic [which might not feel 'cold', but isn't as comfortable to sit on as wood], and when you're spending the best part of £20k on a bespoke-designed bathroom, it seems somewhat churlish to quibble over an extra £100 for a bog seat!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
MDF - medium density fibreboard. The fibres are wood, so they can get away with saying it is made from "real wood"
You won't get splinters in your bum with plastic loo seats; and they are easier to clean.
Barry