please note the decal is just for show and will not be on the box,,
please contact truepoint enginnering ,( Charlie ,, )
peter
regards peter
please note the decal is just for show and will not be on the box,,
please contact truepoint enginnering ,( Charlie ,, )
peter
regards peter
Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.
Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner
Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive
Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp
Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones
Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links
I think I am nearing audio nirvana, but don’t tell anyone.
Hi Adrian they have done the rega version i just have to test it this weekend,, all of them will be sold by truepoint , or by me ,, who ever has them at the time, with 3 spacers 5mm and 3 nylon screws , a ptfe washer for use with the michell adjuster , and some o rings , 3 to place around the bolts,, i hope it sounds as good as it looks,,
pete
Last edited by gwernaffield; 13-09-2019 at 16:05.
Location: West Yorkshire
Posts: 714
I'm Andy.
Does look the business and hopefully it will work as it should
Main system:
Analogue.
Michell Orbe with arm decoupling kit & Pete's Pylons. SME V arm, Denon DL103M (FGS), Firebottle OPT MKII phono amp
Technic SP-10 in Obsidian plinth, AT1010 PMAC v8b arm, Goldring Elite MC Cart and BB3 Phono Amp
Leak Lenco GL75 with Ortofon OM10 cartridge
Technics RS-BX404 Cassette Deck
Network Player.
Raspberry PI plus R2-R DAC (also used as a CD player) plus Pi NAS Server
Digital.
Philips DCC 730 player
Marantz CD50SE
Amp.
Audiolab 8000A
Speakers.
Reiver Jenna floor standers
HeadPhones.
Sennheiser HD545 Ref, HD600, HD477
just set this up ,, the set up has to be checked again , as i seem to be getting more from the techno arm than before ,, more bass tightness, and more mid range ,, also had a problem with a squeek off the locing nut ,which as been sorted by the use of a ptfe washer ,
also added a home made rubber base washer ,4mm thick rubber ,, how ever it looks rough and is,, i am going to use some nylon spacers with a oring on the top , 5mm high 10mm diameter ,, testing all this week ,, i am alos not sure how long the brass will saty the bright color before it changes color ,
pete
Last edited by gwernaffield; 14-09-2019 at 15:02.
Location: West Yorkshire
Posts: 714
I'm Andy.
Bling tastic
Splash of lacquer should stop the brass from changing colour I believe.
Main system:
Analogue.
Michell Orbe with arm decoupling kit & Pete's Pylons. SME V arm, Denon DL103M (FGS), Firebottle OPT MKII phono amp
Technic SP-10 in Obsidian plinth, AT1010 PMAC v8b arm, Goldring Elite MC Cart and BB3 Phono Amp
Leak Lenco GL75 with Ortofon OM10 cartridge
Technics RS-BX404 Cassette Deck
Network Player.
Raspberry PI plus R2-R DAC (also used as a CD player) plus Pi NAS Server
Digital.
Philips DCC 730 player
Marantz CD50SE
Amp.
Audiolab 8000A
Speakers.
Reiver Jenna floor standers
HeadPhones.
Sennheiser HD545 Ref, HD600, HD477
Hi Andy the only problem is i dont want to take it off the deck ,, lol the technoarm is as near to a sme 309 than i have ever heard in the past ,, sooo good,,not sure if i need the 309 ,, i uderstand about lacquer , i will look into it , ,
pete
Location: West Yorkshire
Posts: 714
I'm Andy.
Main system:
Analogue.
Michell Orbe with arm decoupling kit & Pete's Pylons. SME V arm, Denon DL103M (FGS), Firebottle OPT MKII phono amp
Technic SP-10 in Obsidian plinth, AT1010 PMAC v8b arm, Goldring Elite MC Cart and BB3 Phono Amp
Leak Lenco GL75 with Ortofon OM10 cartridge
Technics RS-BX404 Cassette Deck
Network Player.
Raspberry PI plus R2-R DAC (also used as a CD player) plus Pi NAS Server
Digital.
Philips DCC 730 player
Marantz CD50SE
Amp.
Audiolab 8000A
Speakers.
Reiver Jenna floor standers
HeadPhones.
Sennheiser HD545 Ref, HD600, HD477
HI Andy the armbaord is sitting on a home made rubber ring to help stop any vibration off the chassis , i may buy some sorbothane ,the cost is rediculas for a peace that is 12x12cm and 3mm thick , also has to be 70duro and not the softer stuff ,, i have seen that just turn to mush when preassure is applied,
i have been listening to RADIO KAOS , a very hard lp to get every last bit of information out of , but now it is not a problem,,
Charlie from true point put a dimple in the top by the hole that goes to the front , it is spot on the 222mm i used the stevenson template off vinyl engine to set it up ,, sounds great ,, but more to test tomorrow, one thing was a squeek of the nut when tighting so i have used a ptfe washer to stop that works a treat ,, as ususal i have used nylon screws to hold the armboad in place , but so far so good,
pete
Location: Montreal, Canada
Posts: 97
I'm TAD.
Looks quite the business. Well done to all involved. Cannot wait to get my Odyssey updated.
Tad.