And your thoughts on the 15's vs the XR model? I only had the later and enjoyed them very much, kinda regretfully sold them as they were 100% mint, very rare in this neck of the woods...
Location: Iberia!
Posts: 538
I'm Felipe.
And your thoughts on the 15's vs the XR model? I only had the later and enjoyed them very much, kinda regretfully sold them as they were 100% mint, very rare in this neck of the woods...
Well the 15's are a little muffled but they do respond really well to being recapped. I found that they produced a nice wide soundstage with some depth. They sound especially good with rock and arn't that bad with Jazz either. They are not my favourite pair of 70's speakers, this falls to my JR149's. The bass is a little limited but overall the speakers are very enjoyable.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
I'm going to restart this thread again and hopefully do some more mods to the speakers. The whole project is just to how each mod affects the sound of the speaker. The 15's are great because they are so simple. It should be quite easy to see how changing one variable affects the sound. I've only added a small amount of additional of internal damping to the base of the speaker. I've already learned that trying to dampen these speakers too much has a very poor affect in that the output just sounds lazy and muffled. I've been reading with some interest the designs of Jeff Day's reference level Tannoy XO's and I'm hoping that lessons learned from this project will hopefully enable another step up in my already stellar performing external RFC Reference XO's on my 15" MG's. I'm already looking at several new replacement caps for the XO's and shall be trying the following
audyn-true-copper-max-350.jpgjupiter_flatstack_100v_350.jpgmiflex-kpcu-01-350.jpgmundorf-supreme-evo-sgo-350.jpgrike-audio-scap2-350.jpg
These have been shortlisted (and it's not complete) and over time will be compared to see what they offer. Should be fun!
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Hi Andy
Superb thread just wondering what size are the binding posts as want to put some in my 15's?
Cheers
Dan
[B]Class A , A,B Amplification[/B\]
Marantz PM4
Turntable
Thorens TD 125 MK1 , SME 3009 S2 Non Improved , Shure V15 II , SME 2000 Plinth
CD Transport & DAC & PSU
Marantz 6005 , Beresford Caiman , Paul Hynes SR4
Loudspeakers
Tannoy 615 MK2
Speaker Cable , Digital Coax , Interconnects
QED Speaker Cable , Chord Coax Digital , Nakamichi Interconnect , Belkin Interconnect
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker