+ Reply to Thread
Page 119 of 169 FirstFirst ... 1969109117118119120121129 ... LastLast
Results 1,181 to 1,190 of 1690

Thread: Macca's Lash Up 2: Lash Harder

  1. #1181
    Join Date: Oct 2008

    Location: Glasgowshire

    Posts: 9,656
    I'm Gary.

    Default

    Martin,
    Glass Optical cable, best I’ve heard when playing with these was this one.
    http://www.lifatec.com/toslink2.html

    not beer budget though, but it’s worth investing in a good digital cable imo, especially for this Transport.

    Found coax to slightly superior, using a 100 quid Wireworld Starlight 8, which is much better sounding than a well thought of Belden/ Bluejeans cable.
    The Audiolabs so good, I’m pretty sure it’s worth investing in a better cable.

    Had a Black Cat Silverstar before the last time I ran a transport, and was as good as it gets without being silly.
    Improved MkII version out, so may pull trigger on that and call it done.
    The manufacturer has some credentials, knows what he’s about.

    Theres attention been paid to the quality of the coax output in the Audiolab, in that it’s effectively running “balanced”, reducing inherent noise affecting the quality of the bitstream to the Dac.
    Clever stuff actually, attention paid to where it matters most, with no frills.

    Can get behind that in a design.
    AC POWER
    Hardwired 10kVA balanced mains powering entire system
    AMPS
    Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
    SPEAKERS
    Wharfedale Evo 4.4
    DAC
    PS Audio Directstream (Modded)
    TURNTABLE
    Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
    PHONOSTAGE
    Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
    DIGITAL
    OPPO 203 (Modded: Linear PSU, i2s output to Dac) - Roon Endpoint, HDMI input used for all things Streaming/ PS5 /AppleTV ... also good for movies apparently?
    MUSIC PLAYBACK
    Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
    Ipad Roon Remote.
    Apple Music/ YouTube via AppleTV, fed to Dac via Oppo HDMI input/i2s output to Dac.
    SPEAKER CABLES
    Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On
    "Blackcat Cable" Chris Sommivigo's advice - yup, even with biwire it sounds better - and it does)
    INTERCONNECTS
    All Balanced: Ghost+ recording studio XLR cables

  2. #1182
    Join Date: Oct 2008

    Location: Glasgowshire

    Posts: 9,656
    I'm Gary.

    Default

    Another thing worth considering Martin,

    The Audiolab took a few weeks of constant use before it fully got in its stride,
    I’d just let it do its thing for a while before making final judgement.

    Thinking about the cymbal splashiness, that’ll probably pass with some time on the player.
    AC POWER
    Hardwired 10kVA balanced mains powering entire system
    AMPS
    Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
    SPEAKERS
    Wharfedale Evo 4.4
    DAC
    PS Audio Directstream (Modded)
    TURNTABLE
    Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
    PHONOSTAGE
    Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
    DIGITAL
    OPPO 203 (Modded: Linear PSU, i2s output to Dac) - Roon Endpoint, HDMI input used for all things Streaming/ PS5 /AppleTV ... also good for movies apparently?
    MUSIC PLAYBACK
    Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
    Ipad Roon Remote.
    Apple Music/ YouTube via AppleTV, fed to Dac via Oppo HDMI input/i2s output to Dac.
    SPEAKER CABLES
    Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On
    "Blackcat Cable" Chris Sommivigo's advice - yup, even with biwire it sounds better - and it does)
    INTERCONNECTS
    All Balanced: Ghost+ recording studio XLR cables

  3. #1183
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    Yes it depends on the DAC - although some say that if the cable is the correct impedance then it won't matter anyway.

    I might consider getting a proper glass optical cable and see what that does. Probably nothing but I'm still looking for that last little bit to put this system over the top. Still just too soft in the very top end.
    Yeah, sure. If you're considering an optical cable then I'd thoroughly recommend this Van Damme. I use it between the Panny and Beresford, and it really does sound good: https://sxpro.co.uk/van-damme-optical-cable-1m-blue

    Very well made too, and not a lot of dosh. IME, it's hard to beat professional studio cables, from these types of companies, as they're used to supplying rather demanding customers and the prices charged are blissfully free of bullshit 'audiophile markup'

    I think they're made to order, and I got mine in around two days from ordering, so fast service, too!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  4. #1184
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Gazjam View Post
    Another thing worth considering Martin,

    The Audiolab took a few weeks of constant use before it fully got in its stride,
    I’d just let it do its thing for a while before making final judgement.

    Thinking about the cymbal splashiness, that’ll probably pass with some time on the player.
    I'm pretty sure that the 'cymbal splashiness' was there before the Audiolab arrived.

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  5. #1185
    Join Date: Oct 2008

    Location: Glasgowshire

    Posts: 9,656
    I'm Gary.

    Default

    Ah ha...
    AC POWER
    Hardwired 10kVA balanced mains powering entire system
    AMPS
    Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
    SPEAKERS
    Wharfedale Evo 4.4
    DAC
    PS Audio Directstream (Modded)
    TURNTABLE
    Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
    PHONOSTAGE
    Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
    DIGITAL
    OPPO 203 (Modded: Linear PSU, i2s output to Dac) - Roon Endpoint, HDMI input used for all things Streaming/ PS5 /AppleTV ... also good for movies apparently?
    MUSIC PLAYBACK
    Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
    Ipad Roon Remote.
    Apple Music/ YouTube via AppleTV, fed to Dac via Oppo HDMI input/i2s output to Dac.
    SPEAKER CABLES
    Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On
    "Blackcat Cable" Chris Sommivigo's advice - yup, even with biwire it sounds better - and it does)
    INTERCONNECTS
    All Balanced: Ghost+ recording studio XLR cables

  6. #1186
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,779
    I'm Martin.

    Default

    Yes it's really weird. It's not so much splashiness as softness. Like the top end is rolled off too soon except that if I EQ the top end I still hear the same effect so it isn't a simple drop in FR.

    I've tried various combinations of equipment (amps, speakers, transports) and cables and no matter what I change it's there. The Audiolab improved it slightly. I mean it is very subtle but it's noticeable. Except for that it sounds amazing. I just can't figure out the cause.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  7. #1187
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Do you think it's a trait of the tweeters on the JM Labs with some material? It appears to be ever-present, regardless of whatever else you've done, so makes sense.

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  8. #1188
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,779
    I'm Martin.

    Default

    Could be, but both the same? Same with if it is a crossover problem,

    I need to get the other Krell back and see if it is the same with that,
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  9. #1189
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    Could be, but both the same? Same with if it is a crossover problem,
    Sorry, don't understand that bit, mate...

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  10. #1190
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,779
    I'm Martin.

    Default

    Quote Originally Posted by Marco View Post
    Sorry, don't understand that bit, mate...

    Marco.
    I mean what is the chances of both speakers going bad? Pretty unlikely.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •