if any one uses these would they very kinda tell me what size the frame is please,looking at the photo i would guess 30mm x 30mm
if any one uses these would they very kinda tell me what size the frame is please,looking at the photo i would guess 30mm x 30mm
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Looks like something Torquemada would have used during his inquisitions
Location: Canaries
Posts: 193
Mine are 43 x 31 ( distance between downward pointing spike points ). Perhaps you are thinking of sound bases which were for use under speakers and were basically square. I seem to remember 2 sizes: mine are roughly 28 x 26.
thanks for the info mate,i made mine in the end to suit the speaker base
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Location: London
Posts: 1,499
I'm Sam.
Very nice! Did you spot weald them or do the full seams (very neatly if you did!)?
thanks they are fully welded on the underside.
i plan to do a mk2 version as ive found out from searching that the original ones were made from bright angle iron (square edges) and are smaller,mine are 40 x40x5 where as the originals are 25 x25x3, also ive found out who supplied the original lamented boards.i also used m10 spikes instead of m8.
what and if that all makes a difference is anyones guess lol
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Nice and neatly done.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
thanks Kevin,
Ive been playing around with spike height and locknut tightness today and you really wouldn't believe the difference it makes in the sound.
Marco recommended having them as low as possible and from finger tight just an 1/8 of a turn with the spanner. well i concentrated on doing that today and boy what a difference! I can say now i get the whole mana effect "thing" .
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Cool... I've been messing around with/optimising these stands for about 15 years, so it would be rather unfortunate if I hadn't learned anything!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
ok so ive been busy with the welder again and here we have the mk2's,
this time ive used 25mm x 25mm bright angle and laminated mdf boards,more in keeping with the originals
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers