Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Adjustable / sliding SME style armbase and base plate
Here's an interesting job.
A fully (spindle to pivot) adjustable armbase collar and base plate.
All parts are machined from scratch from brass bar and plate / stainless steel.
The collar
Base part machined
All base plate machining done, domed knurled nuts in brass and sliding pins in stainless steel
The complete article assembled
This will be now be sent off for chroming - more pics once I've received it back for checking over and sending off to the customer.
Last edited by Magna Audio; 07-10-2017 at 14:43. Reason: updated
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Senior Member
Location: Out on the wild and windy moors Lancs / Yorks Border
Posts: 593
I'm Andy.
Very interesting project Steve, I have actually prepared autocad drawings for the very same animal with a view to having it made, but have not got around to it. I would be very interested to know the cost of this (Unchromed)
Analogue
401 / PU7 / AT33ev
Longdog Audio Quartz turntable PSU
Longdog Audio MCJ1 - Prototype Phonostage
Digital
Innuos Zen Mini Mk 3
Topping D50s
Caiman Seg & Dorado
Cambridge CXC
Amps
Tron Seven Linestage
Bel Canto Set 40 or Nick Gorham built 300B Set Monoblocks
Speakers
Tannoy GRF Memory.
Tannoy ST100.
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Hi Andy,
I charge £200 for a shallow collar version and £210 for a deeper 40mm (below the base plate) collar.
Special delivery is £7.25.
I can give it a highly polished finish for that too.
Best regards,
Steve
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Member
Location: Perth and Kinross
Posts: 37
I'm Andrew.
Nice job, Steve
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Here's the first one that was always destined to be chromed all finished.
Moving home and workshop (from Surrey to the New Forest delayed my putting pics up here.
Came out nicely.
Last edited by Magna Audio; 07-10-2017 at 14:45.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Posting Permissions
Reply With Quote
