Senior Member
Location: Marlborough, England
Posts: 110
I'm David.
the one that started it all!
Senior Member
Location: Banbury, Oxfordshire/Panteg is where my late father was born
Posts: 4,382
I'm Chris.
Hi David
You are not becomming a techy fanbois are you perchance
Chris
We've gone on holiday by mistake !
Administrator / Magnetic Tape Person
Location: Bristol, UK
Posts: 9,962
I'm Nick.
Hmm - before anyone gets carried away with the moment, beware that the seller's got some pretty crap feedback and can't even come up with a picture of the actual deck he's selling. A sure-fire way to a disappointing purchase.
Senior Member
Location: Hemel Hempstead
Posts: 1,074
I'm Steve.
My thoughts exactly! I've managed 108 feedback without putting a foot wrong, and I've not done anything out of the ordinary, so how crap must he/she be?Originally Posted by Beechwoods
I wouldn't care how long the barge-pole was!
Steve aka 'Twelvebears' (it's a long story)
System: Technics 1210 Mk5, Jelco 750 arm, AT33EV via MF X-LP2 Phono Stage, Oyaide mat and record clamp. SB Touch via Marantz PM-11S1 amp and Wilson Benesch A.C.T. speakers. Mark Grant cables and PS Audio Power Plant Premier mains regenerator.
(\__/)
(='.'=)
(")_(")
Banned
Location: Dartmouth in beautiful Devon UK
Posts: 1,243
It came with a factory fitted Technics SME armplate, back to the future?
Dave
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,535
I'm David.
Feedback special - those feet have GOT to be replaced (same thing for SL110). My BC2's were used with one of these as source with SME and either V15 III or ADC XLM II
Tear down these walls; Cut the ties that held me
Crying out at the top of my voice; Tell me now if you can hear me
Senior Member
Location: Pendle Witch Country
Posts: 690
I'm Ralph.
Forget that one, the real deal at a bargain price is HERE
Cheers
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,012
I'm AudioAl'sArbiterForPISHANTO.
Now that's more like it!!!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Trade: Radlett Audio
Location: Near Saffron Walden, Essex
Posts: 7,090
I'm Dave.
The price is steeeeep. I bought one of those a few weeks ago, with an SME Series 2 Imp and Shure M75ED for £400 'Buy it now'.....
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,012
I'm AudioAl'sArbiterForPISHANTO.
Yes, dahling Dave, and you've kept rather quiet about how it's performing
Come on, spill da beans!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Posting Permissions
Reply With Quote