Double Daftee
Location: Essex, UK
Posts: 3,445
I'm Andy.
Originally Posted by speedy.steve
Here are the other 3 collets - They are for Turntable plinth cable exits.
I have recently made a highly polished Ebony Armboard and fitting kit for an Ortofon AS-212S arm.
Here it mounted on my test deck.
Steve, that looks stunning!
System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+
Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;
1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands
2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.
Me so horny- Impulse H6 Horny
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Why thank you sir!
Yes I am pleased with the polishing.
If existing owners of my ebony armboards want, I can offer a polishing service.
I could do that at low cost + p&p, and return in post same day.
Please contact me for details.
Best Regards,
Steve
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Banned
Location: Huddersfield
Posts: 3,359
I'm David.
are there sonic benefits associated with polishing then?
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
No
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Here are some more projects made to order that I've been completing;
This time a tonearm board for Jazzbones' Techi but in a different wood than ebony;
Can you guess what it is to become?
Rough face off and recessed
Dished
Fitted out for Linn arms
(in flash it looks like this - its not that dark)
In warmer light like this
Still final rubbing down and polishing to go.
As for the wood. It's African Blackwood. Slightly more dense than Ebony and harder. Nice grain to it.
One more for BobC of the Wam to go under his amazing plinths
and an ongoing bass horn project: 1.2m exponentials that will be fitted out with a 15" bass drivers.
Designed and modelled this to give optimal performance 80Hz to 400Hz. This will be part of a 5 way system.
Last edited by Magna Audio; 08-10-2017 at 07:17.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Here is the African Blackwood armboard all finished and suitably polished.
Beautiful grain and markings to this wood.
Last edited by Magna Audio; 08-10-2017 at 07:21.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Here's a large collet (145mm in diameter) that was a rush job for one of BobC's turntables in time for Scalford
Last edited by Magna Audio; 08-10-2017 at 07:23.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Here's a pic of recent pair of armboards I made for Mike in the USA.
African Blackwood on the left, Ebony on the right.
The armbases are for Ortofon RS-212 and AS-212 arms
Last edited by Magna Audio; 08-10-2017 at 07:35.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Senior Member
Location: Warrington
Posts: 3,451
I'm Neil.
Lovely work Steve.
Mana Acoustics Racks / Bright Star IsoNodes Decoupling >> Allo DigiOne Player >> Pedja Rogic's Audial Model S DAC + Pioneer PL-71 turntable / Vista Audio phono-1 mk II / Denon PCL-5 headshell / Reson Reca >> LFD DLS >> LFD PA2M (SE) >> Royd RR3s.
Trade: Magna Audio
Location: The New Forest
Posts: 1,883
I'm Steve.
Thanks Yomanze.
On to counterweights...
I am now able to offer lovely 303 stainless steel counterweights. Machined to your exact requirements.
Here's a 135g one I've just made for Richard (Gromit)
Please contact me by PM or the web link below if you require counterweights, tonearm boards, cabs, horns etc
Last edited by Magna Audio; 08-10-2017 at 07:37.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Posting Permissions
Reply With Quote
