+ Reply to Thread
Page 1 of 7 123 ... LastLast
Results 1 to 10 of 68

Thread: Thing's GL75 Project

  1. #1
    Join Date: Feb 2011

    Location: Sarf Lunnon

    Posts: 2,068
    I'm Dave.

    Default Thing's GL75 Project

    My stacked platters are finally assembled and sounding fantastic.

    I have the requisite platter rings on order and they should arrive any day now. Meanwhile I have put some black electrical tape round the top platter to lessen the hypnotic effect of the balance holes spinning round.



    Only the new plinth to be added and the project will be complete.



    Overall view of the room showing my new Spendor speakers. They may look too close to the rear wall but I have tried pulling them out and there is no real difference in soundstage.

    They were a revelation when I first tried them. The first record I put on I was shocked! Where was the bass? I checked all connectors and phasing of the cables. Everything checked out. I decided to calm down and try another record. Then it happened. It was a pure 'bloody hell' moment. The bass was there it was just so much more natural. Vocals, drums and strings sound so much more real than with the Linn Keilidh's. Thank heaven I decided to take the plunge and buy these babies. They sound great with the Croft pre/power. I am now a definite Spendor/Harbeth convert.

    Just for the record all speaker wires, jumpers and interconnects are Tellurium Q black. Which still need to be burnt in but sound fantastic already so there is only more enjoyment to come.

    In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
    Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
    Along - Tellurium Q Ultra Black cables
    Out - Harbeth SHL5 Plus XD's

    Street photography


    Dave

  2. #2
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Nice one, Dave. I'm not surprised that it sounds good! Lovely looking room (but then I've told you that before), especially the way you have it lit, which looks warm and inviting.

    I've never seen those wedge-shaped Spendies before - interesting!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  3. #3
    Join Date: Feb 2011

    Location: Sarf Lunnon

    Posts: 2,068
    I'm Dave.

    Default

    Quote Originally Posted by Marco View Post
    Nice one, Dave. I'm not surprised that it sounds good! Lovely looking room (but then I've told you that before), especially the way you have it lit, which looks warm and inviting.

    I've never seen those wedge-shaped Spendies before - interesting!

    Marco.
    I wasn't familiar with those Spendors either Marco so fired off an email to Spendor and received a reply from Rob Coe who very kindly attached the spec and a review of the speakers. Very nice chap. It gives me confidence in their company and as a result I will be happy to deal with them in the future.
    In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
    Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
    Along - Tellurium Q Ultra Black cables
    Out - Harbeth SHL5 Plus XD's

    Street photography


    Dave

  4. #4
    Join Date: Sep 2010

    Location: High Peak, Derbyshire

    Posts: 2,241
    I'm Keith.

    Default

    Looking great Dave.
    Keith
    Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
    Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
    CDP: Inca Katana SE
    DAC: Beresford Caiman MkII (LiPo Battery powered)
    Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
    Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
    Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
    Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
    Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target

    Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
    Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595


    Gallery

  5. #5
    Audio Al is offline Pishanto Specialist & Super-Daftee
    Join Date: May 2012

    Location: Dagenham Essex

    Posts: 11,215
    I'm Allen.

    Default

    Very nice room Dave , and some nice kit as well , Win Win
    [

  6. #6
    Join Date: Mar 2009

    Location: Cork, Ireland

    Posts: 652
    I'm Nathan.

    Default

    Very nice room. I love the setup.

    DIY is fine and dandy, but just try selling it on!

    Nathan.

  7. #7
    Join Date: Dec 2008

    Location: Yorks

    Posts: 16,643
    I'm Nobody.

    Default

    Well Dave you certainly don't piss about when you say your gonna do something

  8. #8
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Thing Fish View Post
    I wasn't familiar with those Spendors either Marco so fired off an email to Spendor and received a reply from Rob Coe who very kindly attached the spec and a review of the speakers. Very nice chap. It gives me confidence in their company and as a result I will be happy to deal with them in the future.
    Yup, I've chatted to Philip Swift a few times and he's always good to speak to. I can certainly relate to the synergy between Croft equipment and Spendors, as I ran the same preamp I'm using now once with SP100s, and it sounded sublime

    How are you finding the transition from Linn gear to what you've got now? It must be like night and day!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  9. #9
    Join Date: Mar 2011

    Location: London

    Posts: 289
    I'm Frank.

    Default

    Great looking room Dave!!

    After listening to my Technics for the past few weeks, my Lenco was re-installed temporarily in order to refresh my memory.

    I have to say that it's making some very nice noises.

    I might have to invest a bit more time and energy into tweaks and upgrades myself.

  10. #10
    Join Date: May 2008

    Location: Cricklewood

    Posts: 9,074
    I'm ILOB.

    Default

    Like how you put your record collection
    Loves anything from Pain of Salvation to Jeff Buckley to Django to Sarasate to Surinder Sandhu to Shawn Lane to Nick Drake to Rush to Beth Hart to Kate Bush to Rodrigo Y Gabriela to The Hellecasters to Dark Sanctury to Ben Harper to Karicus to Dream Theater to Zero Hour to Al DiMeola to Larry Carlton to Derek Trucks to Govt Mule to?

    Humour: One of the few things worth taking seriously

+ Reply to Thread
Page 1 of 7 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •