thank you for info,
Did you utilize this idea ?
http://www.tnt-audio.com/clinica/merlino.html
connecting the shield to the ground on 1 end only - by power plug
Location: SE London, UK
Posts: 49
I'm Filip.
thank you for info,
Did you utilize this idea ?
http://www.tnt-audio.com/clinica/merlino.html
connecting the shield to the ground on 1 end only - by power plug
No i didn't, nice link by the way However you are 100% correct, the screen is only connected to Earth at the mains plug end & not the equipment end (where it is insulated from all the other connections)
Bests, Mark
"We must believe in free will. We have no choice" Isaac Bashevis Singer
Finally found my prize (ignore the 25mm diameter bit, the 20/25 refers to 20mm diameter & 25M long) Flexible steel conduit with a 35mm bend radius & covered in an overall stainless steel braid. It'll just be a question of stuffing a load of cable through 18M of this stuff
External diameter of 20mm & an internal diameter of 16.9mm, it will take a 10mm^2 twin & earth cable with a tad of room to spare. Finally I'll be able to have a fully screened cable back to the consumer unit
Now I just need some 20mm cable clips Oooh, these would look quite funky with that stainless steel braid
This will be going in next year when I'll need that 10mm^2 cable
There are other things like this on fleabay if anyone is interested, type adaptaflex into ebay search
Bests, Mark
"We must believe in free will. We have no choice" Isaac Bashevis Singer
Yup, I did think about buying it straight off the bat at £40 + delivery... Instead I put in an offer at £35 & got a counter offer of £37.50 which I was thinking of in the first place
E2A:- That might not be exactly the same stuff Mark, what I bought is steel but with a stainless braid covering it. I have no doubt there is well over £100 worth there though
I'm happy
Bests, Mark
"We must believe in free will. We have no choice" Isaac Bashevis Singer