If carbon fibre is used as a dampening medium then why not have a complete ring of carbon fibre instead of the arm spacers, and leave the arm board as is. Any thoughts??
kind regards.
Tad.
Printable View
If carbon fibre is used as a dampening medium then why not have a complete ring of carbon fibre instead of the arm spacers, and leave the arm board as is. Any thoughts??
kind regards.
Tad.
Yes that’s probably one of the best options, BUT have a look at the cost of a piece of carbon fibre big enough and the the cost of having it machined. I think it may be prohibitively expensive for most, but if you can afford it then why not.
I know someone who works at an F1 factory, and what they throw out you would not believe, so I am going to ask if that may be a possibility of a getting a piece. But machining it cheaply won’t be easy.
https://smaqyq.db.files.1drv.com/y4m...&cropmode=none
just cost Tad. this was expensive and is 22mm thick , i used the michell arm board as a template , had to use i longer screw to earth the arm and the board , i have not seen any thing as thick on ebay since,
Thanks for the input. I may have a guy here in Montreal who would be prepared to do this work, (friend of a friend etc.,). watch this space, i.e. next month!
t.
Dear Adrian, if you can get a piece of CF, may we make arrangements via PM?. Thanks so much for your efforts. T.
I will see what my mate says, it may not be possible.
Cf plate 22mm thick
https://www.rockwestcomposites.com/p...lock/433-group
I see what you mean about the cost. additionally, as it's an import from the USA, there is import tax and duty to pay. about 20% for starters. I'm going to have a good look here in Montreal to see if any interest. How does sheets of sorbothane glued together and cut to size appeal? From previous comments appears this may be too soft and not stiff enough. As always, you can request me to stop, but I like new approaches and ideas, just in case you had not guessed!
kind regards,
T.
HI tad the sorbithane is like a jelly with a skin on hence the different duro rating i have only used 50 duro , hard to find 70 or 90 ,you can buy sorbothane Bobbins but the thread is M6 and not the M5 needed, so a special reducer would have to be made,
https://www.thorlabs.com/locations.cfm
These have sorbothane at 70 duro , also trying to glue sorbothane is a swine, super glue cracks, it depends on what you are trying to create i used 3 sorbothane washers under the arm board onto the base and passed the bolts through , but when you tighten it up they just went to mush , hence the bobbin idea , but i think if you use the bobbins you will need 6 all together as i found movement in the ones i have ,so i put 3 nylon spacers which just slide in to stop this , now it is 100% magic
kind regards
pete
https://www.thorlabs.com/newgrouppag...tgroup_id=6421
https://www.thorlabs.com/newgrouppag...1867&pn=BMF4/M
Pete, thanks for the update. T.