Steve,
Very nice simple site, pictures tell a story, and you produce some lovely gear and it looks like great quality.
All the best
Adrian
Printable View
Steve,
Very nice simple site, pictures tell a story, and you produce some lovely gear and it looks like great quality.
All the best
Adrian
Thanks Adrian,
I've emailed you
Sent from my Pixel XL using Tapatalk
More aluminium work this time a massive block arm mount for a Plantine Verdier turntable.
Machined from a 100mm square block of billet aluminium this 100mm high, 85mm wide and 95mm deep block will be ultra rigid. It's pretty heavy too.
SME arm ready with threaded bolt holes.
Some pics of finished product & materials / under progress.
https://uploads.tapatalk-cdn.com/201...5657d0a42e.jpg
https://uploads.tapatalk-cdn.com/201...8a26ca9819.jpg
https://uploads.tapatalk-cdn.com/201...801d4d1f3b.jpg
https://uploads.tapatalk-cdn.com/201...6c03b6ea91.jpg
https://uploads.tapatalk-cdn.com/201...11834b0546.jpg
https://uploads.tapatalk-cdn.com/201...974045008e.jpg
Sent from my Pixel XL using Tapatalk
Latest solid Ebony armboard for a SL-1210 to fit a SME arm.
https://uploads.tapatalk-cdn.com/201...1ac19ade1d.jpg
https://uploads.tapatalk-cdn.com/201...0610e8854a.jpg
Sent from my Pixel XL using Tapatalk
I never tire of seeing these - just quality...
A thick headshell spacer in ebony.
I was asked to make a 10mm thick headshell spacer.
Pictured here on my test headshell.
https://uploads.tapatalk-cdn.com/201...1200f8940a.jpg
https://uploads.tapatalk-cdn.com/201...c5a2ca1e1d.jpg
https://uploads.tapatalk-cdn.com/201...d08521d9ae.jpg
Sent from my Pixel XL using Tapatalk
Here's a solid ebony armboard for the Technics SL-1210mkII.
This one is to fit an Ortofon TA110 tonearm.
Easy fitting from above using my bespoke fitting kit.
I get quite a few enquiries for fast change boards, so more than one arm can easily be used.
Just three bolts and it's out.
I also do a bolted from underneath fitting.
https://uploads.tapatalk-cdn.com/201...7e7fa48351.jpg
https://uploads.tapatalk-cdn.com/201...12d68e6b7c.jpg
Sent from my Pixel XL using Tapatalk
Step Up Transformer sort out project.
These were very nice 1:100 transformers put in a turned barrel style case, all done by someone else..
Problem was the transformers were not shielded. There was an attempt at shielding but the face plate was wooden.
They hummed big time.
I totally encapsulated the transformer assembly in MUmetal. I turned a copper faceplate that I MUmetal lined.
I mounted the transformer sandwich construction to the faceplate using brass threaded spacers. Transposed the phono sockets and wiring.
Then I MUmetal covered the wiring area.
Tested on my system.
No hum :)
https://uploads.tapatalk-cdn.com/201...55b6d3274a.jpg
https://uploads.tapatalk-cdn.com/201...1fb8cfd4ad.jpg
https://uploads.tapatalk-cdn.com/201...2628d5f481.jpg
https://uploads.tapatalk-cdn.com/201...b777d45006.jpg
https://uploads.tapatalk-cdn.com/201...9bbd53b992.jpg
https://uploads.tapatalk-cdn.com/201...fcf8c8d05a.jpg
https://uploads.tapatalk-cdn.com/201...cd99831988.jpg
https://uploads.tapatalk-cdn.com/201...8356e42992.jpg
https://uploads.tapatalk-cdn.com/201...266f2c567c.jpg
https://uploads.tapatalk-cdn.com/201...ef4b8d120b.jpg
Sent from my Pixel XL using Tapatalk
A pair of screw on horn fitting adapters for the amazing Vitavox S2 compression drivers.
Under creation.
Made to original format.
From 4" round bar stock.
Features large 16 threads per inch imperial screw thread cutting.
Then tested for smooth fit on my own Vitavox S2 drivers.
Original Imperial thread fitting studs to go - unique to Magna Audio
Sent from my Pixel XL using Tapatalk
https://uploads.tapatalk-cdn.com/201...dced76baed.jpghttps://uploads.tapatalk-cdn.com/201...9f1e1f6f90.jpghttps://uploads.tapatalk-cdn.com/201...27dbfac4cf.jpghttps://uploads.tapatalk-cdn.com/201...e996d0a51b.jpghttps://uploads.tapatalk-cdn.com/201...f9de2da770.jpghttps://uploads.tapatalk-cdn.com/201...1417039cea.jpghttps://uploads.tapatalk-cdn.com/201...e481649e67.jpghttps://uploads.tapatalk-cdn.com/201...c39c5dbb37.jpg