-
Here's some more Robbie ;)
A couple of 9" mounting SME armboards for the large plinth Voyd Voyd deck.
One in ebony, the other in 4mm lacquered brass plate.
Both internally threaded for the SME armbase.
https://uploads.tapatalk-cdn.com/201...d9880af864.jpg
https://uploads.tapatalk-cdn.com/201...bcc9f515d1.jpg
-
-
-
-
-
Solid ebony replacement armboard for a Feickert turntable. Will fit a Jelco Tonearm directly, doing away with aluminium Jelco arm base completely.
https://uploads.tapatalk-cdn.com/201...7de485610e.jpg
https://uploads.tapatalk-cdn.com/201...55f8c3be5a.jpg
https://uploads.tapatalk-cdn.com/201...09666ea030.jpg
Sent from my Pixel XL using Tapatalk
-
Turned aluminium cone to match existing ones.
Original was lost.
Idea is the polished finish will over time oxidise to match the patina of the Matt one.
https://uploads.tapatalk-cdn.com/201...89065c256c.jpg
https://uploads.tapatalk-cdn.com/201...4e1d2b9729.jpg
Sent from my Pixel XL using Tapatalk
-
Next project underway.
Aluminium adapter rings to screw onto Vitavox S2 / Philips EL5502 compression drivers to fit Altec 1005B horns.
https://uploads.tapatalk-cdn.com/201...169055592f.jpg
Sent from my Pixel XL using Tapatalk
-
Cutting a large internal screw thread for Vitaxox / Philips compression driver adapter rings.
Over 2" diameter thread.
I also test fit them on my own Vitavox S2 drivers.
These will fit a large format horn to a Philips compression driver (somewhere in France).
Finishing and mounting drillings to go.
https://uploads.tapatalk-cdn.com/201...c5090a03f8.jpg
https://uploads.tapatalk-cdn.com/201...f5a78b8581.jpg
Sent from my Pixel XL using Tapatalk
-
Here they are all done..
Was off to France with them.
Customer reported back that they fit perfectly.
https://uploads.tapatalk-cdn.com/201...0f6562f953.jpg
https://uploads.tapatalk-cdn.com/201...bafd6b1431.jpg
Sent from my Pixel XL using Tapatalk