-
Progress catch-up on a pair of mid bass horns I'm making.
They will be used in a 4/5 way full spectrum horn system.
18mm premium birch plywood.
1.2m long. Exponential horn flare.
Frequency usage 100Hz to 400Hz.
Eminence Kappa 12A 12" bass drivers.
Driver chamber and bracing to do.
These will fine articulate, fast and tuneful mid bass.
https://uploads.tapatalk-cdn.com/202...dc31069981.jpg
https://uploads.tapatalk-cdn.com/202...89d711bc2c.jpg
https://uploads.tapatalk-cdn.com/202...4a5e55b035.jpg
-
-
Progress on the large midbass horn project.
Now there are two [emoji3] and mouth surround is fabricated.
They will be used in a 4/5 way full spectrum horn system.
18mm premium birch plywood.
1.2m long. Exponential horn flare.
Frequency usage 100Hz to 400Hz.
Eminence Kappa 12A 12" bass drivers.
Driver chamber and bracing to do.
These will have great articulate, fast and tuneful mid bass.
https://uploads.tapatalk-cdn.com/202...0b00080348.jpg
https://uploads.tapatalk-cdn.com/202...7e3666d45d.jpg
-
-
Solid ebony turnable / equipment platforms.
Circa 18"x16" and 10"x16" both 2" thick.
Dowelled and wood epoxyed (supplied by Make Wood Good - Oak and Teak slow set epoxy).
This is what nearly 20kgs of ebony looks like.
The small one nearly finished, the big one rough sanded. Levelled and bevelled.
https://uploads.tapatalk-cdn.com/202...daec414021.jpg
https://uploads.tapatalk-cdn.com/202...36aef3cd28.jpg
https://uploads.tapatalk-cdn.com/202...8c05f3717f.jpg
https://uploads.tapatalk-cdn.com/202...6343b7d760.jpg
https://uploads.tapatalk-cdn.com/202...ca42a59259.jpg
-
1 Attachment(s)
Here's a pic of the Driver that will go into the Exponential midbass horns.
I've been making the back boxes, so more pics to follow soon.
https://uploads.tapatalk-cdn.com/202...a3090a2b9c.jpg
-
As part of the ebony equipment bases project, I was also commissioned to make 8 of 3" x 3" x 1" and 8 of 2" x 2" x 1" ebony blocks.
These will go under various pieces of equipment.
Here they are rough sawn.
https://uploads.tapatalk-cdn.com/202...39317c2322.jpg
Here are the 3" blocks accurately sized and coarse finished.
https://uploads.tapatalk-cdn.com/202...eaeca2844a.jpg
Next up the 2" square blocks and then fine sanding and polishing.
-
-
Fidelity Research FR64s low compliance type cartridge, anti skate weight.
Off to Ireland.
https://uploads.tapatalk-cdn.com/202...e9036036d4.jpg
-