[IC]: Michell Orbe TT with Rega RB300 Arm

Not sure if I want to do this or not as had this for many years (always wanted one when they first came out…..)

Michell Orbe (AC version) with full plinth (owned for just over 6 years)
Black chassis with clear plinth and cover (no badge on the plinth but never had one when I bought it - purchased from Emporium)
Currently has Petes Pads (extra isolation between the feet and the plinth), Petes Pylons (these were pre-production), extra isolation between the arm-board and the chassis plus the ceramic bearing.
Also has the clear acrylic platter (this was a pre-production one but works very well).
Currently running a Rega 300 which I have owned from new (bought in 1994, came on a Gyro at the time) (includes the armband for an SME arm).

I have all the parts to put it back to original.
So, I have a few options as to how I will sell it.

1. Sell as-is (all the mods and the arm attached )
2. Put back to original and sell like this with the arm
3. Sell as is plus all the original parts
4. Put back to original and include the upgrade parts
5. Sell the none used part separately

I have the boxes for both the TT but would have to send the other platter and bits separately.
If I was to sell would prefer that the kit is demoed etc due to the monies involved?

As for price???

1. £3.0K
2. £2.7K
3. £3.3k
4. £3.3k
5. Original parts - £250. Upgraded parts - £250


Or keep it/them ????

Pics of as it is now:

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

In its original format:

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/albu...080&fit=bounds

With an SME V arm mounted (may be up for sale separately:

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/albu...080&fit=bounds

All prices are negotiable I suppose (P&P if required will be for the purchaser to cover)

Thanks for looking

Great sounding deck, enjoyed the time with mine.

Bit of a rarity with the acrylic platter mibbay, goes well with the plinth.
The plinth badge can be easily bought from Michell, they are great to deal with.

GLWS

Looks mint, and well cared for. GLWS.

Cheers both.

Mid week bump

I was asked to put it back to stock for some photo's and while in this state took a quick video (light is rubbish so apologies for that!!)

https://www.youtube.com/watch?v=ogRS2BgSrME

Bump

Nearly 700 views and little interest :(
Come and have a listen (I don't bite - anymore..) as it is a beautifully made and sounding deck - may even throw in the cartridge in for free!

Now back to original spec.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

OK - price reduction:

Back to original settings.
(Not selling with the cartridge though)

1. Sell with all the mods and the arm attached.
2. Put back to original and sell like this with the arm
3. Sell as is plus all the original parts
4. Put back to original and include the upgrade parts
5. Sell the none used part separately

I have the boxes for both the TT but would have to send the other platter and bits separately.
If I was to sell would prefer that the kit is demoed etc due to the monies involved?

As for price???

1. £2.7K
2. £2.5K
3. £3.0k
4. £3.0k
5. Original parts - £250. Upgraded parts - £250 (if the TT sells with one or other but not both spare parts

The current price for the full plinthed ORBE is now around £5.5k.

Still for sale

Bump

HIYA

Bump