Hi all,
I've just downloaded Jriver and have set up a Media Center. Its finding Volumio ok, but it's only playing the first 3 seconds of a track before moving on to the next track
I've tried everything and just can't figure out why!!!
Any help?
Printable View
Hi all,
I've just downloaded Jriver and have set up a Media Center. Its finding Volumio ok, but it's only playing the first 3 seconds of a track before moving on to the next track
I've tried everything and just can't figure out why!!!
Any help?
could be a bit rate problem between the 2 units.. a driver issue or try and see if there is a newer build
in jr click tools, options.. then audio device, device settings and then dsp and output formats... Need to check your pi too. try them all on standard 44/16 first. there can be quite a few device options so avoid kernal one. start with direct sound then wasapi etc.
if a update is avail it usually says so at bottom left
done some tests with 24 and 25. Mine is doing similar except just playing 5 seconds then stopping. As JRiver used to work with my RPI i can only think its a volumio issue, but I could be wrong. No issue using audirvana to rpi tho. cancel that i have an issue with audirvana too now :doh: must be volumio
Just tried them to my oppo dvd player and it works fine so its a volumio thing. must have come from the last update i did recently. as it was working last time i tried it. but if it sends to oppo then it should go to the pi too. knew i shouldnt have updated when it was fine :doh:
i JUST DID A FACTORY RESET ON VOLUMIO. working now with audirvana as far as i can see.