I totally agree on all counts. If I was going to put it in a new plinth, wood (on its own) is not what I'd use.Quote:
Originally Posted by costerdock
Marco.
Printable View
I totally agree on all counts. If I was going to put it in a new plinth, wood (on its own) is not what I'd use.Quote:
Originally Posted by costerdock
Marco.
I wouldn't use wood either, but then the look of the M5G isn't to my taste either, too fussy.
Unless one has experimented with changing the plinth (or any other part) I'll have to take opinion with a pinch of salt. It's all academic though as nobody does aftermarket plinths.
Well you say that, but you don't really know unless you have tried different direct drive solutions with all the other bits you have added bolted on.Quote:
Originally Posted by Marco
You've compared to an SP10, but presumably that had the stock bearing, bearing mounting plate, platter, power supply, feet etc. - what would it sound like with the same amount of care taken to improve it...
Looks, of course, are a matter of personal taste. I happen to like the look of the MK5G, although minus the (superfluous to requirements) pitch controls, it would be a lot better.
Honestly, if I thought for one second that the plinth was significantly holding back the T/T's performance, I'd have done something about it. Quite clearly, however, it isn't, as otherwise the T/T couldn't possibly sound as good as it does!
Why don't I bring it round to your place and you can have a listen for yourself, and compare it with your own? :)
Marco.
Sure, but in life not everything is possible. Let's just say that experience tells me that the motor unit in the Techincs is, sonically, rather special. Nothing, however, is perfect.Quote:
Originally Posted by YNWaN
I've compared my modded SL-1210 to about seven (very different) SP10s, and none of them made me go 'wow, I must have that', otherwise me being me, I'd have bought one by now ;)Quote:
You've compared to an SP10, but presumably that had the stock bearing, bearing mounting plate, platter, power supply, feet etc. - what would it sound like with the same amount of care taken to improve it...
Yes, undoubtedly a similarly (judiciously) modified SP10 would most likely be even better, but I don't see anyone currently producing the necessary bits you've mentioned to do it!
Marco.
As a mk5g owner myself I too think they look very nice indeed, particularly with the ebony armboard and Mikes ETP platter added. I dont mind the pitch slide as I dont think it spoils it. Like you though Marco I would consider removing it IF and only if the 'fill in' and finish was absolutely on point. Also with all the mods I've done and what I've heard from my own Techie, I've never sensed in anyway that the plinth was a hindrance of any kind :)
Sorry for being so late getting back to you Chris , had an incredible day yesterday ! Became a Grandad , a girl ,Ruby Mary Kate 8 pound 11 oz .Quote:
Originally Posted by Stratmangler
Sorry for the thread drift .
Between £500 and £1200 depending on spec and condition , A Mike New Bearing BBP and platter is about £1300 or so ?
Like I said to you before ,I am finally happy with the way my 1210 is sounding (at last) but I don't think mine is any better than anyone else's 1210 or any other TT for that matter , I really don't care , its good enough for me at this moment , but if I was looking to spend that sort of money I would be looking at an SP10 or something similar rather than bodge around any further with my 1210 + it would make for a very top heavy system , I'm still looking at changing my speakers next .
I think Robert at Inspire Audio might strongly disagree with you on that. He produces a very good well made plinth for the SL1200/1210 in any finish or colour you would wish for. He tried to sell me one when I bought my M5G from him. Like many here it wasn't to my taste.Quote:
Originally Posted by YNWaN
I also agree that the pitch control spoils the look of the deck and would gladly dispense with the device if I had the necessary skills to do so, but I haven't so it has to stay.:(
Hi Folks,
I have chased up Dave of MRCU to answer your emails, he should have Base Plates and the bolts available by now.
He says he is also getting ready to purchase another block of 10 bearings for all you lucky guys in the UK.
Excellent... Make sure that he definitely supplies the bolts (and 'distance pieces')! Remember that the latter are also rather important ;)
IMO, to eliminate any 'faffing about', the BBP should be supplied as a 'kit', consisting of the BBP itself, all necessary fixings and a tube of appropriate adhesive, so that the customer has to hand everything that he or she needs to do the job, with the minimum of fuss :)
Marco.