As Stan says :)
BTW gr0001 , can you please pop into the welcome section of the forum before the site owners get you ;)
Printable View
As Stan says :)
BTW gr0001 , can you please pop into the welcome section of the forum before the site owners get you ;)
Afternoon all, sorry I missed out on the threads on upscaling etc, since I asked the question. However, some very good replies in there. I do agree that if it was recorded in 16 bit you can't magic 2 to the 8 extra voltages levels from it, but listening to the Genesis remasters, it does help if things are remastered for the CD format and not so heretical if it is a band member that does it! From this and some of the Creedance Clearwater remasters, seems that there is still a lot of life left in the 16 bit formate.
Cheers Andy
I have now put in the 2.2uF 200V AuriCaps this morning, and they're sounding mighty impressive already. Bass is superb - tight and extended. The best I've yet heard from a film cap. Fabulous midrange, too.
I'm getting fed up with the 5-way socket and will be looking to remove it and solder my favourite caps in place soon. ClarityCaps or AuriCaps? Hmm.
I have been trying THIS ONE
I might buy a few more before he runs out ;).
Stan, you're going to have to do a Gator model both with the discrete line stage and with the passive output too on the second set of output sockets.
As an aside, WHY did Sony/Philips settle on a 2V output? I mean, with a passive style of output level, this is about the same as vintage tuners and tape decks.......
Nope, I'll know when I've researched enough and am satisfied. It's been a fun experiment, but I want to close the Caiman up and leave it be.
Actually they're smaller than the ClarityCaps (23 x 20mm) and fit in easily, especially as they have longer leads. I did have to prune the ends, though, to fit in that damned socket. When I remove the socket I should be able to solder my cap choice in without problems. If I have to slightly open up the PCB holes, I'll destroy the through-hole plating and will have to be careful to solder them both sided.