-
The 2.15m tall horns have made it to their customer's home.
The mid horn (top yellow one), upper mid (bottom green one) and tweeter (middle red one) are sitting in the cradles I made.
Look like they are ready to take over the world[emoji23]
The big downward firing bass horns are 1.7m long (horn path) exponential bass horns.
Will cover 50Hz to 400Hz, using 12" horn loading friendly Eminence drivers.
https://uploads.tapatalk-cdn.com/202...7223de0c4e.jpg
https://uploads.tapatalk-cdn.com/202...f6a6cb08ac.jpg
It's been a really interesting / fun project.
-
-
Another solid ebony armboard for Technics SL-1210 G deck for the lovely Audiomods Series 6 with VTA adjuster.
Bolted in from underneath, flush top surface.
Off to the USA for this one.
https://uploads.tapatalk-cdn.com/202...c28306de4a.jpg
-
Fidelity Research replacement and new parts.
A couple of weights this time.
One a delicate anti-skate weight, the other a super heavy counterweight to balance even the heaviest cart / headshell combos!
Machined from solid stainless steel.
https://uploads.tapatalk-cdn.com/202...5b2059a69e.jpg
Test fitting on my tonearm
https://uploads.tapatalk-cdn.com/202...e85a968b28.jpg
Lateral weight removed
https://uploads.tapatalk-cdn.com/202...b21ff71ced.jpg
https://uploads.tapatalk-cdn.com/202...22587010e8.jpg
-
Here's a standalone heavy armpod I made a while back.
Ebony armboard, brass adjustable feet etc
All installed with a Audio Technica 12" arm.
Nice to see things installed.
Resides in the USA this one.https://uploads.tapatalk-cdn.com/202...d9ea8fcae3.jpg
-
Here's a 175g lacquered SME extra screw on weight.
Primer done
https://uploads.tapatalk-cdn.com/202...b49748b5e0.jpg
Lacquered with Whitworth threaded spigot
https://uploads.tapatalk-cdn.com/202...ef5ec76373.jpg
Off to Andy in the UK
-
A new 295g heavy counterweight for the mighty Fidelity Research FR64s/FR66s.
Usual delrin insert.
Finished to match the tonearm in stainless steel.
Pictured in my FR64s
https://uploads.tapatalk-cdn.com/202...e3361270b9.jpg
https://uploads.tapatalk-cdn.com/202...98d96923e5.jpg
https://uploads.tapatalk-cdn.com/202...7f8d3f2e9a.jpg
I'm working on a EMT 929 mono side weight now, then a FR64s lighter of the two anti skate weight.
-
-
Here's a pic of the EMT mono side weight mounted up on the customers deck.
https://uploads.tapatalk-cdn.com/202...2704b6e6f3.jpg
https://uploads.tapatalk-cdn.com/202...43a03e799c.jpg
I also made him a slightly lighter, but still heavy Fidelity Research FR64s / FR66s counterweight.
https://uploads.tapatalk-cdn.com/202...84ec3821ef.jpg
-
Here's another Fidelity Research FR64s anti-skate weight.
The light version this time.
https://uploads.tapatalk-cdn.com/202...e1117adb88.jpg
Test fitting on my FR64s tonearm.
https://uploads.tapatalk-cdn.com/202...bcea8530ff.jpg
