Mod your Beresford 7520

Gazjam.. are your running two (2) 4032s without any issues on the headphone output?

Quote:

---

Originally Posted by Gazjam

Regarding the Maplin PSU 12v/13.5V issue....

On the 7510 I found 13.5V to be a bit too forward and artificially heightened.
So I ran it at 12V.

The 7520 with Tirna 4032 OP Amps..??

:eek:

Somethings just clicked into place.
The "in your face-ness" of 13.5V on the 7510 has been replaced with far more focussed soundstage - and it was scary good before.

Can sum it up best by saying the music sounds more "real" - more dynamic, more PraT, better seperation.

I listened for a couple of days then went back to 12V.

No contest, its back to 13.5.


Cant recommend it enough.



Trailer?
The Wolfson Dac change, is it for that one thats in the Linn DS?

---

I'll be certainly giving the 13.5v a go then. The one I'm getting put in is the WM8716. I had a quick google and couldn't find out if that's the one in the Linn or not. Anyone else know?

Gaz, Is it possible for you to measure the PSU output voltage under load? - My linear supply is adjustable within a couple of volts or so but it has to come out of the case to do it.

Cheers - Ken

Quote:

---

Originally Posted by trailer

I'll be certainly giving the 13.5v a go then. The one I'm getting put in is the WM8716. I had a quick google and couldn't find out if that's the one in the Linn or not. Anyone else know?

---

Blimey, that Wolfson chip is cheaper than the PCM1716 - It's even cheaper than an 8 pin op-amp! I think I'll order a couple just in case... ;)

Quote:

---

Originally Posted by trailer

I'll be certainly giving the 13.5v a go then. The one I'm getting put in is the WM8716. I had a quick google and couldn't find out if that's the one in the Linn or not. Anyone else know?

---

There you go http://docs.linn.co.uk/wiki/index.ph...f_the_DAC_chip


jon

Interesting. I tried the 7520/4032 combination at 13.5v with the Maplin power supply yesterday and had to switch back to 12V fairly rapidly. I did notice it had a more forward, dynamic sound, which is a good thing, but I found the vocals/midrange to be sort of "tainted", a bit metallically nasally twangy artificial kind of sound (sorry, not too good at this describing sounds lark!) which I hated.
On the positive side, I find the Maplin at 12V is a step up from the supplied power supply so it wasn't a waste of money.

Quote:

---

Originally Posted by Dougr33

Gazjam.. are your running two (2) 4032s without any issues on the headphone output?

---

Im running one 4032 for line output and a 4562 for headphones.
Don't own headphones so dunno!

Quote:

---

Originally Posted by sponge

Gaz, Is it possible for you to measure the PSU output voltage under load? - My linear supply is adjustable within a couple of volts or so but it has to come out of the case to do it.

Cheers - Ken

---

Hey ken,
I don't own a scope or anything sorry, wouldn't know how to use it anyway!

Quote:

---

Originally Posted by Spod

Interesting. I tried the 7520/4032 combination at 13.5v with the Maplin power supply yesterday and had to switch back to 12V fairly rapidly. I did notice it had a more forward, dynamic sound, which is a good thing, but I found the vocals/midrange to be sort of "tainted", a bit metallically nasally twangy artificial kind of sound (sorry, not too good at this describing sounds lark!) which I hated.
On the positive side, I find the Maplin at 12V is a step up from the supplied power supply so it wasn't a waste of money.

---

Cool. Just goes to show, maybe it's system / opinion dependant?
The sound you described there was how I found my 7510 to be at 13.5V.
Something just "clicked" in my system, the vocals now just seem more projected and more "real" to me.
Could be a system dependant thing as I said.

It is better than the supplied psi at 12 or 13.5v so that's good.

Quote:

---

Originally Posted by Gazjam

Hey ken,
I don't own a scope or anything sorry, wouldn't know how to use it anyway!

---

OK Gaz, no problem - I may crank it up to 13V but I dont want to make the internal voltage regulators work too hard. Sound is pretty good as it is though.