Make over for a Heybrook TT2, ebony armboard, ebony spacer extra heavy CW
Here is a bit of a make over and fix up project for a Heybrook TT2 turntable.
First a new solid ebony armboard, 18mm thick with the 4 mounting points.
Fitting is a Rega RB arm.
https://uploads.tapatalk-cdn.com/201...c081d8a00b.jpg
https://uploads.tapatalk-cdn.com/201...6a6f20076d.jpg
A solid ebony replacement for the aluminium spacer ring
https://uploads.tapatalk-cdn.com/201...a17e196715.jpg
An extra heavy tungsten counterweight with nylon damping insert
https://uploads.tapatalk-cdn.com/201...723683ce9a.jpg
These turntables originally suffered from a well documented problem of the armboard mounting area not being level with the platter.
I carefully shimmed the armboard so that it was perfectly true to the platter in all planes.
Ready to go.
Extra counterweights for a Zeta tonearm and Pioneer knob in Aluminium
First up a set of counterweights for a Zeta tonearm in bronze. These are to add greater balancing range to the counterweight
shell / carrier into which they bolt.
https://uploads.tapatalk-cdn.com/201...fbb252aaed.jpg
Then a replacement aluminium knob for a Pioneer turntable.
The new one is on the right.
https://uploads.tapatalk-cdn.com/201...56f1f5cbd0.jpghttps://uploads.tapatalk-cdn.com/201...be8851c08c.jpghttps://uploads.tapatalk-cdn.com/201...ed9e374fb0.jpg
Ebony armboards to replace plywood for Graham Phantom 2 and Fidelity Research arms
