Moral of the story: Never believe what you read on the internet! :lol:
Moral of the story: Never believe what you read on the internet! :lol:
Ok - I'll wait for part and confirmation of 13.84mm (14mm tolerance fit) from jandl100.
Extra 2mm of material should add the grams you want too.
/Steve
Hi GiovanniQuote:
Originally Posted by Gdg
It really is not a problem.
Apart from the size of the hole, there are a couple of things that really need sorting anyway ...
1) the weight isn't quite high enough, so the extra weight of the insert that Steve can do should sort that
and 2) it really needs an extra grub screw to hold it securely to the arm - one isn't enough to do that properly
So there are excellent reasons to send the c/weight back to Steve anyway.
Please don't concern yourself, it isn't a problem! :cool:
Thank you Jerry,Quote:
Originally Posted by jandl100
this was a very embarrassing situation, for me.
3 weights made for a PL-71 customer arm 16mm hole, weighs are 78g, 98g and 118g to take a range of carts from 9g to 30g and give the extra mass the SPU needs on a 9" arm.
The latter will take the full SPU weight perfectly (ala GM/ Silver Meister etc).
(I know this cos' I have the SPU Silver Meister on my PL-71 arm at the moment:) )
https://uploads.tapatalk-cdn.com/201...302c6463b3.jpg
Hi Steve,
Looking good, matey!
Btw, I have another idea for a product option - how about doing custom-made arm plates? I suspect that there would be loads of people interested in those when fitting new tonearms to their turntables....
I know that Paul Hynes, for example, is looking for an SME-type arm plate for an SL-1210, so if you could make one, I'd PM him :)
Marco.
Well i was gonna ask if he steve has the facilities to make me a New armboard pod for SME Mount..Quote:
Originally Posted by Marco
http://i12.photobucket.com/albums/a2...ING-SIN/TT.jpg
Depends on the material and shape - Mr Coco was over a while back cutting half inch thick gun metal for his (now mine) armboard.Quote:
Originally Posted by Andre
That was a 4 sided polygon with slot for SME base and 4 tapped M3 holes (I think they were M3) to take the slider.
SME have pretty good jigs I think which helps.
Well it's exactly the same as that armboard pictured above as that is my armboard.Quote:
Originally Posted by speedy.steve
I don't want the sausage shape SME i was wanting it like Michell do for the Gyro, Easier for you, will allow me to fit a mission 774 original easier if i need to..the original is aluminium.
What is the diameter? Clamping large flat things in my chuck might be problematic...