I was approached to make the 3 arm balancing counter weights, anti-skate weight and lateral weight for a Dynavector DV-505 arm, needed to complete the arm, as these had gone missing.
These were made to original weight specification.
https://uploads.tapatalk-cdn.com/201...12f86adc4e.jpg
and the lateral weight
https://uploads.tapatalk-cdn.com/201...33c38dbce2.jpg
hello Steve,
did you ever get a request for the Sansui SR-929 lateral weight with the post?
thank you
Hi,Quote:
Originally Posted by Sillver79
I did and I did reply to it. Perhaps email trouble somewhere along the line. Sorry for that.
I will dig out my reply and send via PM.
Best regards,
Steve
Here's an Ebony armboard bound for a SL-1210. Drilled for a Jelco SA750D tonearm and provisioned with extra deep mounting surface for the 'Shuggie' upgrade Jelco armbase.
https://uploads.tapatalk-cdn.com/201...9014fdbd98.jpg
https://uploads.tapatalk-cdn.com/201...826364675f.jpg
Beautifully made and sounding great. Bass is noticeably more tuneful and vocals never sounded better in my system- ssssibilance is now a thing of the past. Highly recommended ;)
Yes, The Ebony armboard is just excellent !!Quote:
Originally Posted by cuddles
Thanks Robbie.
Here is an update to the armboard / pod I made for a customer a while back.
The original armboard for the lead filled stand alone arm pod I supplied was for a Fidelity Research FR64s arm.
It had to be shallow as the arm is quite high and there was not a lot of height overall to play with.
The Schick 12" arm is much lower so a thicker solid ebony armboard could be fitted.
Here is the base and board
https://uploads.tapatalk-cdn.com/201...26145f08fb.jpg
Test mounted on the pod ready to go.
https://uploads.tapatalk-cdn.com/201...a68221e80b.jpg
https://uploads.tapatalk-cdn.com/201...c4b7692b24.jpg
https://uploads.tapatalk-cdn.com/201...4e5d25b33a.jpg
Here's a little job for germbox
He was looking to balance a DL103 and heavy AT headshell and also needed spacers to get the VTA right.
Full thread here
http://theartofsound.net/forum/showt...ghlight=spacer
I made him a 142g Stainless steel counterweight and headshell to cartridge spacers in ebony at 3.5mm and 4.5mm thick.
In the Post to the USA.
Be interesting to hear how they get on.
https://uploads.tapatalk-cdn.com/201...4cb6930dc1.jpg
https://uploads.tapatalk-cdn.com/201...2cbf4f453d.jpg
Indeed, Steve, and I suspect that they'll work superbly! I'm sure that Freddy will let us know :)
Btw, I think you should make a major point of promoting those little ebony spacers, as they often sell for silly prices on ebay, and are useful to lots of folks seeking to obtain more VTA flexibility. Far better too, sonically, than using a thicker T/T mat to make up the same adjustment difference!! :exactly:
Marco.
+1 I think ebony spacers, wooden headshell and ebony armboard for my future upgrade:)