-
Audio Technica 1503 tonearm armlift holder/mount
Super shiny final/fine polishing done.
This bespoke Audio Technica 1503 tonearm armlift holder/mount is ready.
Made from solid stainless steel 6mm thick plate.
Double grubscrews on both the armpillar and Jelco arm lift.
An elegant solution to easy and safe cueing.
Using a Jelco armlift and Audio Technical arm clip.
It cleverly allows the use of the anti-skate mechanism too
Pics show finished article back to raw 6mm stainless steel plate
https://uploads.tapatalk-cdn.com/202...7c4992327b.jpg
https://uploads.tapatalk-cdn.com/202...d33efe8e5a.jpg
Test fitting before polishing
https://uploads.tapatalk-cdn.com/202...54e8f6bf6d.jpg
Spinning up for machining the mounting holes
https://uploads.tapatalk-cdn.com/202...d23fb37a95.jpg
Raw 6mm SS plate, rough shaped
https://uploads.tapatalk-cdn.com/202...5c5cdc816e.jpg
-
A little fix for a broken Fidelity Research FR64s / FR66s tonearm.
This is a replacement fit for the lateral weight mounting rod - these do seem to get sheared off.
No easy way to remove the sheared off bit / replace sometimes.
I make a very thin walled sleeve that fits over the arms lateral weight mounting position. This can be hobby glued in place by the customer and the lateral weight used as normal.
Pictured here, with and without my own lateral weight - testing the fit.
Also a pic of the raw stainlesssteel bar.
Matching finish to the original.
Off to the USA soon.
https://uploads.tapatalk-cdn.com/202...0f64a21991.jpg
https://uploads.tapatalk-cdn.com/202...0565311e02.jpg
https://uploads.tapatalk-cdn.com/202...a3ed76ddc6.jpg
https://uploads.tapatalk-cdn.com/202...bc055949c5.jpg
-
-
Another counterweight.
This time a super heavyweight for a SME 3012 in Australia.
Lacquered to give a similar finish and sheen.
It features double underside grub screws.
https://uploads.tapatalk-cdn.com/202...3ade7e722c.jpg
https://uploads.tapatalk-cdn.com/202...1f620c34e6.jpg
-
Here is the SME extra heavy main counterweight I made, paired with its other parts at the customers home
https://uploads.tapatalk-cdn.com/202...45d95934de.jpg
Very happy with the fit and finish
-
-
Here is a heavy stand-alone armpod.
11cm tall, with ebony armboard to fit a SME 3009 tonearm. Designed for a custom tonearm cable exit arrangement.
Height adjustment and levelling via the 3 brass feet
https://uploads.tapatalk-cdn.com/202...b1081ee6e0.jpg
https://uploads.tapatalk-cdn.com/202...8658e29b88.jpg
https://uploads.tapatalk-cdn.com/202...e6ac118302.jpg
Can be made to fit pretty much any tonearm and height requirement.
-
An extra counterweight to sit along side the main weight for a SME 3012 mkII.
This will enable the use of the heaviest of cartridges and headshells.
Lacquered to close match.
https://uploads.tapatalk-cdn.com/202...6299cda4cd.jpg
https://uploads.tapatalk-cdn.com/202...c5c346a9f3.jpg
https://uploads.tapatalk-cdn.com/202...95fb6b2b18.jpg
-
-