Ha!Quote:
Originally Posted by Wakefield Turntables
No, it does not!!!
It's Old but Gold - a Smart and Brown Model A Toolroom Lathe, partnered with my equally Old but Gold Hayes Diemaster Milling Machine...
Sent from my Pixel 7 Pro using Tapatalk
Printable View
Ha!Quote:
Originally Posted by Wakefield Turntables
No, it does not!!!
It's Old but Gold - a Smart and Brown Model A Toolroom Lathe, partnered with my equally Old but Gold Hayes Diemaster Milling Machine...
Sent from my Pixel 7 Pro using Tapatalk
Thanks...Quote:
Originally Posted by Jimbo
Sent from my Pixel 7 Pro using Tapatalk
This was tricky to get horizontal and vertical runout to zero before hitting it with the endmill - thankfully my behemoth 15" rotary table is über accurate!
This completes the spindle bearing upgrade - and what an upgrade!!!
Gonna stick some bitumen Damping sheet on the underside of the ally platter.
Onto the Toneram next...https://uploads.tapatalk-cdn.com/202...b22e6b3428.jpghttps://uploads.tapatalk-cdn.com/202...98e2c26450.jpghttps://uploads.tapatalk-cdn.com/202...9fd20f6fdf.jpghttps://uploads.tapatalk-cdn.com/202...a1cfd0bd73.jpghttps://uploads.tapatalk-cdn.com/202...3211384b59.jpghttps://uploads.tapatalk-cdn.com/202...53dfca79d2.jpghttps://uploads.tapatalk-cdn.com/202...7435f41fb6.jpghttps://uploads.tapatalk-cdn.com/202...c22357c923.jpghttps://uploads.tapatalk-cdn.com/202...9141f68a85.jpghttps://uploads.tapatalk-cdn.com/202...7e73d3b7c4.jpg
Sent from my Pixel 7 Pro using Tapatalk
Nice work :)
Always a pleasure to see threads like this, especially on TT's that don't seem to get much attention. Makes a change from reading Technics, Lenco resto's. ;)
yeah I agree nice to see something different. Techy and Lenco have been done to death so good to see something new/old!
Really loving this Project!
Runout on the bearing plate is 10 microns and I've even gotten the runout on the pressed steel inner platter (the idler wheel drives the inside of this) down to just 50 microns!
Just need to figure out the best way to stop the Ally outer platter from 'ringing' now...https://uploads.tapatalk-cdn.com/202...1dff9922e2.jpghttps://uploads.tapatalk-cdn.com/202...9abb28c5f4.jpghttps://uploads.tapatalk-cdn.com/202...ac7156bd2d.jpghttps://uploads.tapatalk-cdn.com/202...8e2bc0a9e7.jpghttps://uploads.tapatalk-cdn.com/202...5da7256ec4.jpghttps://uploads.tapatalk-cdn.com/202...50fba06756.jpg
Sent from my Pixel 7 Pro using Tapatalk
Are you looking for damping under or on top of the platter?
Maybe try some silent Coat for damping under platter?
https://www.silentcoat.co.uk/collections/deadening
Underneath I think. I'm thinking of bonding an acrylic platter on top of it too...Quote:
Originally Posted by Wakefield Turntables
Sent from my Pixel 7 Pro using Tapatalk