I wonder if I should reserve one, just in case....;)
I wonder if I should reserve one, just in case....;)
I'll put my name down for one of these as well:)
Ditto please :)
Steve
I do not have a production update as of today, but it should not be long now!
GOOD NEWS!
I now have 10 Jelco collars and have made up packs containing:
One machined collar in plain bead blasted natural alloy
One fitted M6 grubscrew
One small nylon stub (optional use to cushion the grub screw against the arm pillar)
Three Stainless Steel M4/25mm Cap Head bolts with nuts and washers
One Allen key for grub screw setting.
Price including Royal Mail Special delivery Next Day is £35.
Can everyone who expressed interest please PM me to confirm their order? Where possible, I would prefer to be paid via PayPal, so please give an e-mail address so that I can send a PayPal invoice. Other forms of payment will of course be accepted!
PM sent :)
Marco.
Will it fit the Jelco 250?
Yes it will.Quote:
Originally Posted by colinB
Marco has asked if the collar is easy to fit. It is a simple matter of unbolting the old Jelco collar and bolting in the new one.
The radius of the collar is 1mm larger than the original one, which is no problem for SL1200 users who have Sound HiFi's Jelco armboard. The top section of the custom collar is 5mm taller than the Jelco one, so please make sure that your arm, as currently set up in its original collar, has at least 5mm of bare arm pillar showing above the collar. If there is less than 5mm showing, then the arm may not go down low enough to ensure correct VTA when using my collar. Hamish did kindly send some photos of his Jelco 250ST sitting in a Technics and that had plenty of clearance, so hopefully nobody will have a problem - but do make sure!
Here is what the kit contains (also a brief instruction sheet):
http://i55.tinypic.com/2hqx82a.jpg
Shuggie, Will it fit Soundsupports armboard? If it will, I'd like to order one. The only problem, I am either too tired or too stupid to find how to send you a PM.