Moode 2.5 up and running on my system using ipad 4, does not work in my computer web browser. Easiest setup I have had so far for wifi and nas drive.
Printable View
Moode 2.5 up and running on my system using ipad 4, does not work in my computer web browser. Easiest setup I have had so far for wifi and nas drive.
Just a brief update on TR2 :-)
A new caching Library loader with enhanced capability for large collections is done.
Once cached on the server, the Library loads very fast. A couple seconds for 20K tracks from USB HDD. Page refresh or reboot won't cause reload of Library, the cache will be used until it's manually cleared, then Library will reload (to get new or changed music for example) and new cache created. The cache creation only adds a small amount of overhead to Library load.
Enhanced large collection capability is courtesy of diyAudio user "anewnadir" :-)
Regards,
Tim
Hi,
Here is screen shot of new Source config showing "Clear Library Cache" feature.
Regards,
Tim
Sounds as though this will be really good Tim.
Many thanks for this facility.
I shall get myself another sd card this week to try again.
I have a vague feeling that each time I format a card it's not doing it properly - so would be prudent to start afresh.
Cheers
Steve
Quote:
Originally Posted by TimCurtis
Hi There,
I've noticed a small problem with 2.4 and the 2.5 TR.
I have the HifiBerry Dac+ and when the volume control is set to logarithmic in the customisation menu changing volume with the normal control causes the alsamixer percentage to rise from 81% to 90%.
As I know very little about the tech involved I was just wondering if this was normal.
MoOde set up as per the website instructions with the additional ones due to the HifiBerry DAC reporting spurious values to alsa.
Cheers,
Alistair
if your formatting a sd card you need to use a specialist formatter, and not a hdd one. SD Formatter is one free one.Quote:
Originally Posted by SteveW
Hi Alistair,Quote:
Originally Posted by Aligauld
Yes normal however ALSAMIXER uses a strange hybrid scale that is neither %, absolute level or dB so I never use that scale as reference. The amixer command displays the real % scale.
In any case, the Hifiberry devices clip at volume % >81 so its important to not only set MPD volume control to "Hardware" and Logarithmic curve to "Yes" but also Max volume % to 81. These settings will provide a nice smooth logarithmic curve in the 0-50 knob range and will prevent clipping at knob settings 81 -100.
Regards,
Tim
Hi There Tim,Quote:
Originally Posted by TimCurtis
Yes I had the max volume set to 100% in the customisation menu. Changed now and will check things out in the morning.
Many thanks for both your work with this and all your help.
Cheers,
Alistair
Anyone got this working with android. Yet.... Last time i had it in, i couldnt find it anywhere and had to remove and go back to 2.4.
Hi There Grant,
Just tested on my Xperia z3 and working perfectly.
Cheers,
Alistair