One for Dan The Man if it can be picked up.
http://www.ebay.co.uk/itm/Ferrograph...item2c96db1010
Printable View
One for Dan The Man if it can be picked up.
http://www.ebay.co.uk/itm/Ferrograph...item2c96db1010
I remember the Panhard in your avatar Andr'e. Pretty car, one of the last they made if I recall. There used to be one local to me as a lad. Two stroke I believe. There was also a Borgward Isabella nearby. Not seen either type for over forty years.
Yeh the name disapeared about 1967. Blame Citroën :rolleyes:
A rare 'S' version of the 'Focus One'
http://www.ebay.co.uk/itm/Michell-Tu...item19fb9010c0
Look like the Rhodium plated ones they used to Manufacture
http://www.ebay.co.uk/itm/Michell-En...item2c96e266e3
Weird! I've just been informed by eBay that my Gale GS301 speakers are on their way. I didn't buy any!? :scratch:
:lol: They were OK speakers don't moan :D
And yesterday I did post 20 here by mistake:
http://theartofsound.net/forum/showt...er-Plugs/page2
Don't worry. A couple of guys in a white van will pull up outside your door a few minutes later after you have received the delivery. They'll inform you that the item was delivered to the wrong address and that they are there to pick it up.
Happened to me a few weeks ago.
there mine:eyebrows:
Sonab OA-5 vintage omnidirectional speakers in decent condition. These are quite nice sounding. No bids yet, starting price of £100.
In London, ending shortly.
http://www.ebay.co.uk/itm/Sonab-OA-5...item3f469d8cde
Ive been thinking about Omni Speakers for a while, i recon i'll probably end up with a pair, im in a very small room where speaker placement is a no no, beside im not a fan of yer general forward facing units..
Did you know Tannoy made an Omni Loudspeaker in the early 70's..
That'll be a fiver loike..
Yeh Peerless & Philips units
Geoff:
They were called 'Orbitus' i think they had 12" Monitor Golds! If your looking for a pair of Sonabs it has to be the 'OA-2212' These were awesome speaker...
I always fancied a pair of Akai 'NDS-80' omni's misen
Here Geoff found a site which shows them
http://www.soundup.ru/index.php?opti...umns&Itemid=93
The BIC 'Soundspan' models were good Geoff, don't see many over here now tho..
Yeh they did conventional yet adventurous speakers like the 'Formula' range..
£39.99 too much, pitty they scrapped the half pence piece
you never know with the Ruskies. might even be quite good. they built a decent aeroplane
Yeh they built some un decent ones anorl :D
Fancy a new unused pair of 45 year old AR7 speakers?
http://www.ebay.co.uk/itm/3216722799...%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/Pair-of-Br...3D351303091584
Nice looking amp this.
Hi All!
Anyone had experience with these:
http://www.ebay.com/itm/191511813979...%3AMEBIDX%3AIT
I am looking for something non-fatiguing (i currently have Ushers and i can say they are too fatiguing for me, even though i have tried many sources and amps)
This Belden screened mains cable looks decent:
http://www.ebay.co.uk/itm/NEW-BELDEN...item51c557dc4d
I may try a few metres.
At £15 a metre! :eek:
It's good stuff, but I now generally prefer using thick gauge solid-core cable for mains leads. Makes sense, as that's what's in the wall already (with twin & earth), and plus it sounds better, to my ears, than multi-strand, except in low-current applications, such as with CDPs and small PSUs :)
Marco.
I cannot be doing with Stiff Mains cable they have to be flexible.. For that i use Black Rhodium Ag plate Cu Mains cable.
It can be a PITA to solder/work with, but after that, I just find that the finished solid-core mains leads bend into whatever shape you want them (kind of like heavy-duty wire wool), so I don't find their stiffness a problem.
Better stiff than floppy, I say (and Tabatha agrees)! :eyebrows:
Marco.
Not referring to the workability i am referring to the factors such as you need a lot of space behind equipment, you cannot use short runs etc..No excess leads on my gear they have all be tailored for neatness, it's not possible with a stiffy :eyebrows:
Hehehe... No worries.
I can use short runs because the dedicated mains for the hi-fi is directly behind my system (no more than 1m away from the kit), which has plenty of space behind it, so I can arrange everything neatly. Therefore, 'stiffies' aren't a problem. Mine have nice thick 'bell-ends' (plugs) on them, too! :D
Marco.
i hope you give em a good polish on a regular basis :eyebrows:
Yesh, they get buffed to a shine with a big wire brush... Oi loikes pain! :eek: :eyebrows:
Marco.