:popcorn:
Man this is a great idea. I think there might be room for something like this in my amp. I'll be following this thread closely.
Be sure to post lots of detailed info and pics! Thanks!
:popcorn:
Man this is a great idea. I think there might be room for something like this in my amp. I'll be following this thread closely.
Be sure to post lots of detailed info and pics! Thanks!
Could anyone offer advice as to how to wire this up to the 7520:
http://cgi.ebay.com/IR-Remote-Contro...-/220630057277
This looks like a real easy DIY:
http://www.flickr.com/photos/linux-works/3875427675/
Anyone care to offer some help? I am going to tackle this design:
http://www.flickr.com/photos/linux-works/3875427675/
The chip in this design "L293" http://www.st.com/stonline/products/...1330/l293d.pdf looks to be the device that would go between the TC-7520 existing volume control and the motorized volume control, correct?
The motorized volume control I will be using is this alps pot http://www.mouser.com/ProductDetail/...85DQt5lqqCI%3d
How exactly would I wire the tc-7520 to the L293? My techie friend is on vacation until Monday, I am sure he can tell me but I thought I'd get this going
You could always try the LDR type.
I spotted this t'other day http://www.tnt-audio.com/accessories...control_e.html
problem is all the cool design are in the UK! Shipping to the states gets ridiculous.
What I posted above will cost less than $20 including the motorized volume control
That's cool, Chris, cheers. I've got all the bits for a LS clone but never thought of adding remote control. :)Quote:
Originally Posted by Stratmangler
Does it take specialized equipment or software to program the EEPROM?Quote:
Originally Posted by fmzip
Is that ALPS motorized pot linear? I think the pot in my amp might be linear because I can hardly turn it without big volume changes. I have to be really careful so if it was remote controlled it would probably be hard to dial in the perfect volume level.
Quote:
Originally Posted by James G
It's logarthmic. Either will work from what I have read.
You can order the chip from this guy and he said he'd load the firmware free of charge:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=250649137554
Firmware is here:
http://www.netstuff.org/mvc-master/firmware/arduino/
I have an email into the guy who developed it to ask him what is the difference between the two firmwares. Looks like he based the software to use a sony dvd remote using the transport arrow keys and the center button for volume up and down and slow volume up and down using the left and right keys, center button being mute.....
I have all the parts ordered from Digikey for the PCB assembly, two sets of parts cost me $15, and the motorized volume controller were $7 a piece. Pretty cost effective approach if this works
That guy only ships to the US. :(Quote:
Originally Posted by fmzip
Drat! :steam: