PSU for Mini-T Amp using Paul Hynes Regulator

One observation so far: I've been running the levels up to as high a volume as I'll ever go and the PSU case is just not getting hot. So for any potential builders out there, the die cast case itself is probably sufficient heatsinking. I shall mount my heatsink anyway, since the damn thing is on order and I may as well finish the project as intended. I'll take a photo of the completed PSU then.

Meanwhile, latest system shot (with Sadé's Cherry Pie playing...)

http://farm9.staticflickr.com/8533/8...37f38a5e_b.jpg

That's a lovely photo Martin. You must have a good camera.
If it's not rude to ask, what did the PS cost to build?

I'll leave you to ask Paul Hynes about the PR3iEHD module as I don't want to trample on his pricing.

The transformer, case, heatsink and other bits amounted to about £60. Of course, I re-used spare cables but I'm sure many constructors will have some bits lying around.

Quote:

---

Originally Posted by Covenant

That's a lovely photo Martin. You must have a good camera.

---

Thanks - it's a Lumix GF1.

http://www.phototravelreview.com/wp-.../07/648490.jpg

One further mod: I replaced the 10,000uF Panasonic electrolytic capacitor (or additional energy storage, as Paul refers to it) with a 22,000uF BC cap with high ripple current rating (low ESR). I also added a snap choke to the mains power cable as the PC and ancillaries are putting out a lot of noise and hash. I'm not sure I can hear a difference at the moment, but I'll leave it for a day or so to let the cap fully form.

I'm still waiting for the heatsink to arrive, but the PSU really doesn't need it at the volumes I'm using.

http://farm9.staticflickr.com/8538/8...55b4d97a_b.jpg

Cool project dude!

Quote:

---

Originally Posted by MartinT

One further mod: I replaced the 10,000uF Panasonic electrolytic capacitor (or additional energy storage, as Paul refers to it) with a 22,000uF BC cap with high ripple current rating (low ESR). I also added a snap choke to the mains power cable as the PC and ancillaries are putting out a lot of noise and hash. I'm not sure I can hear a difference at the moment, but I'll leave it for a day or so to let the cap fully form.

I'm still waiting for the heatsink to arrive, but the PSU really doesn't need it at the volumes I'm using.

http://farm9.staticflickr.com/8538/8...55b4d97a_b.jpg

---

Looks good.

I cant see an earth wire grounding the metal case, worth fitting if you have not done that yet.

Also some brown, blue and earth heatshrink on the incoming mains cable near the terminal block to finish it off nicely as at the moment they all look to be clear Teflon tubing.

There is an earth wire, Mark: the twisted green coming from mains earth going to one of the heatsink mounting bolts.

I take on board the mains sleeving, I only have black sleeving but I triple-checked the cores before connecting them up on the terminal block!

Good call with that smoothing cap Martin. I often use good quality 22,000uF smoothers. You cant have enough in reserve I say! :)