Adcom GFA 535 power-amp. Bit of a sleeper these. Collect only from Lincoln. The seller has the matching pre-amp too.
https://www.ebay.co.uk/itm/Adcom-GFA...53.m1438.l2649
Printable View
Adcom GFA 535 power-amp. Bit of a sleeper these. Collect only from Lincoln. The seller has the matching pre-amp too.
https://www.ebay.co.uk/itm/Adcom-GFA...53.m1438.l2649
Lenco GL75 available for £30 in Castle Cary
https://www.gumtree.com/p/record-pla...ry-/1283985559
Hopefully it comes with platter.
Mint Sony PS6750
https://www.ebay.co.uk/itm/202200367686?ul_noapp=true
I'd love to hear these
https://www.leboncoin.fr/image_son/1...86.htm?ca=12_s
The best Sony Speaker ever made, Maybe even the best Japanese speaker???? TVK thinks so.
Dunno. Maybe the Pioneer Tad LS 10 might give them a run for their money?
http://i66.tinypic.com/2ueob5z.jpg
By the way. (and it'll make you weep!) This is the TAD/Pioneer system put together for George Lucas!! :eek:
http://i65.tinypic.com/2111hf6.jpg
Opulent. A pair of meaty valve Amps on floor too
That's several million quid's worth I reckon. This is what just the mid horn drivers sell for used: https://www.ebay.co.uk/itm/One-Pair-...kAAOSwiqFaWpuh
Jesus!!!!
To misquote the old Ringo Starr joke - "The best speakers from Japan? Heck, they're not even the best speakers from the Sony factory"! :D
I'd wager that Sony's own SS-GR1 and APM-8 would show them a clean pair of heels, along with some of the bigger offerings from the likes of Technics, Diatone and TAD. Personally, however, I'd stick a decent wager on the prize going to the Yamaha GF-1s.
Heres a nice little Panasonic vintage setup for anyone
https://www.gumtree.com/p/stereo-sys...tem/1283652490
In Marco country , so beware :eyebrows:
I could retire on the money that lot cost..............hang on, I am retired! :D
I want this very badly
https://rover.ebay.com/rover/0/0/0?m...2F292418038323
Mmm. Yes. Just my sort of amp.
How about a nice valve integrated instead? :)
http://i66.tinypic.com/29x89sk.jpg
Line Magnetic Audio 805. Ooooh! (not on ebay)
LOVE line Magnetic kit. Igor ... throw the switch!!
Very nice!
Not eBay but just been given another Pioneer PDS 703 - Works like a dream love these players - i make the 4 stable platters in my collection & a 6 disc one...
Don't you love it when the seller really takes the trouble to go into detail ... https://www.ebay.co.uk/itm/THORENS-T....c100005.m1851
Lovely !! Does it actually have a bottom part , or is that it??
Looks like a complete TD124 MkII motor unit and armboard to me ... plinths are easily come by.
Be interesting to see what it goes for. TD124s are quite sought-after these days but we have no idea the condition of this one they can potentially have a lot of weaknesses - main bearing and the stepper pulley bearing and shaft can need attention, while the motors gum up over time (my motor was completely rebuilt by Martin Bastin and I've also have the stepper pulley bearing replaced by Loricraft) these are the sorts of things that can make a bargain purchase turn into a relatively expensive one.
Ariston RD80 for £180! https://www.gumtree.com/p/home-cinem...le-/1284667516
So I put in a bid for these and won them for the grand sum of ...... £12.50 :lol:
Not tried them yet (still in the boot).
What's the best way of testing them and in particular individual drivers and the crossovers?
Happy to strip things down, desolder stuff and (depending on costs) purchase new drivers, caps etc.
Don't need more speakers, purchased them just for fun and learning. If I discover they are simply too knackered I will take them to the local dump.
Major bargain there. They are well worth the effort of sorting them out. Parts are a bit tricky to find at a sensible price but do turn up.
The bass driver coils can foul in the magnet gap, but that can usually be sorted. The T27 tweeters should be OK.
A recap is a sensible move. I used new Alcaps from cricklewood electronics on ebay. Put some foam pads behind the crossover to stop it resonating.
Don't interfere with the foam interior damping, it's supposed to occupy most of the cabinet volume.
These are really lovely sounding speakers and a good pair is an appreciating classic. You should find them every bit as enjoyable as your Eatons.
Not ebay but a hell of a private B&O collection up for auction in Denmark.
http://www.lauritz.com/en/auction/ba...rne/i4904237/#
And Mrs. B says I have too much B&O!!
Many thanks Geoff
Really useful info. Any tips on what simple things I can do to establish what is what before I embark on more serious stuff like a recap?
I see some folks use a battery and a multimeter to test things. I already have a multimeter and I guess I can scrounge a battery from somewhere. [emoji3]
Would it be better if I started a new thread in the DIY section?
E
Sent via Tapatalk
You don't need a battery. Just test coil resistance with the meter. Should be around 5 to 6 ohms if I'm correct.
Check bass drivers for free cone movement back and forth without getting coils rubbing. Just push them gently backwards and forwards with your fingers.
There's not a lot else to give you problems really, even the crossovers should work, but probably won't be at their best until recapped.
Don't worry about using different wire inside for now. The tweeters have captive leads anyway, you'll probably need a bit of slim heatshrink sleeving to reconnect those if you take them out.
Yes. If you're going to do these as a project, a thread in the Drawing Board section would be a good idea.
Tannoy Eatons in Sheffield. They look pretty decent. Proper 'pepperpot' dual concentrics! Plenty of punch too.
https://www.ebay.co.uk/itm/Tannoy-Ea...UAAOSwlFdabjp1
Wharfedale Super 10 RS DD full range 10 inch drivers in old cabinets, nice! These won't stick around long. I'd like them, but have too many other projects.
https://www.ebay.co.uk/itm/Wharfedal...53.m1438.l2649
Why didn't Tannoy think of this? Slackers!
https://www.ebay.co.uk/itm/Tannoy-Mo...UAAOSwzRlaGxjL
Those Corellis suffer from some of the worst Bextrene 'quack' that I have ever heard - I had an immaculate pair years ago and had to get rid - there is NO WAY they have anything to do with LS3/5 a midrange - the midrange quack dictates they are a no no. If anyone else advises you otherwise, I suggest you run away - people who recommend these speakers are either a) living in the past b) have hearing problems c) living in a dream world or d) need their ears syringing.
You have an 'ignore' button Edward, should you choose to use it.