Thank you all.
Printable View
Thank you all.
https://www.ebay.co.uk white caravan sealing tape £10 eBay item number:192740513384
Suggestion for putting under the chassis counterweights?
hi i just put the weights back in with silicone, like Michell have done for years and then any space filled with the caravan sealing tape, also added this on top of the black stuff to give the chassis more weight
Terrific. Today I finally received a package of ten 2BA x 1/2 Inch Countersunk Pozi Plated screws. These precision British screws used by Michell hold the counterweights onto the chassis, and several on my Gyro were no longer in perfect condition. Now I can make these improvements.
Hope it all works and improves your experience with the gyro ,
New Review on TNT regarding the pylons and feet ,
been quite on here , just had a new orbe , to be the next upgrades too , changed the pylons to '8's no springs, and the color will change from silver to candy apple red , to make it pop ,
Ok, I'm a bit late to this party. I'd be looking to upgrade the suspension towers om my Gyro.
BUT I notice that Peter, user gwernaffield, had not posted since February 2022.
Anyone knows if Peter still is making the parts?
Peter's new user name is "rocking kid".Quote:
Originally Posted by 02GF74
Pete's Pylons and other Gyro/Orbe goods can be purchased from "True Point Audio".
https://www.truepointaudio.com
but this time they wont appear before i am ready
so the reference series of the pylons has been done, i must say thank you to mad moon and Vince for using them over the past 6-7 years , i would not let them be made with out testing , all the best pete
Question: Are there any Michell TT owners, specifically the GYRO SE, who still use the Pabst 24v AC motors and power supply?
Or would want them?
I think my Gyro non SE has one, it got burned out by the PSU and I had to swap it out. Michell supplied a new one or rebuilt it - I cant remember which - it was a challenge getting the cable to sit in the housing properly, kept rubbing and making a noise - sorted it eventually
Backstory: My Gyro SE is S/N 047, March 1999. I purchased it used from a guy in NYC. When I got it, it had two Pabst 24v motors and its power supply. The power supply actually had the same S/N as my Gyro. I sold the Pabst that came with the turntable to move to the DC option, yet kept the power supply and the second Pabst 24v. There is one problem with this motor, two of the very tiny wire leads have detached and I am not in a position to re-solder them. Not a huge project for someone who has those skills. But I also do not want to throw away these vintage pieces.Quote:
Originally Posted by Mr.Ian
If anyone has an interest, please let me know. I want nothing for them, just to find someone who might want them as a back up or just historical interest.
is that the PSU in a clear acrylic case ? sold mine to someone in Italy :-(
The power supply is a black plastic 4"x4"x2" box, looks like a ferrite piece (5"-6" long, 5/8" dia.) out of the transformer and before the plug in to the turntable. On the bottom is a tag: TOROID International, Ltd. P/N: TI-66638, SL9837. Toroid means it has a doughnut-like round circular winding.
its been a while since i was on here , the new gyro i have been told the suspension is pre fitted to the chassis , in the factory , all i can think of is the holes must still be out of true to the chassis , the Brass weights replace the Lead and the stainless steel , the motor pod looks like it has become a bit more stable ,and may be a bit more weight , when i did the suspension , they used to stick as the post holes were out of alignment on the gyro , may be on the new one that has been half sorted ,