Nice one, László. It looks good. It'll be interesting finding out what you think of the sonic results you've achieved, and whether or not you consider them to be superior to what you obtained with the stock crossovers :)
Marco.
Printable View
Nice one, László. It looks good. It'll be interesting finding out what you think of the sonic results you've achieved, and whether or not you consider them to be superior to what you obtained with the stock crossovers :)
Marco.
It will have to wait a bit because my power amp is under construction right now. I am getting its chassis repainted so it'll take some weeks until it will be usable again :-(Quote:
Originally Posted by Marco
A pair of tidy Lancasters with 15" MGs sold for £2100 on eBay today. Nice to know that I have an appreciating asset!
Yes, it is very good to know that they are not only nice sounding, historical speakers, but also a good investment :-)Quote:
Originally Posted by Shuggie
Cos they're bloody good! :)
Today I mounted out the rotary (energy and treble) switches and they are quite easy to clean. They were very-very dirty but now they are shining. I cleaned the connections and relubricated the whole thing. Now it looks like new.
I think there is no need to bypass these selector switches, they only need some cleaning.
I made some photos about the process but unfortunately I forgot to shot some photos of the original (dirty) condition :-(
If you're interested let me know and I will upload the photos.
Yes please - it all adds interest to the thread :)
Marco.
Here are the photos. I hope it can be seen on the first few photos how dirty the rotary selector was. The bottom round plate can be taken off easily so the connection van be cleaned.
http://img827.imageshack.us/img827/6...040826a.th.jpg
http://img849.imageshack.us/img849/3...040831e.th.jpg
http://img64.imageshack.us/img64/5927/p1040841v.th.jpg
The last few photos are taken after the selector was cleaned and put together.
http://img834.imageshack.us/img834/7...40846pl.th.jpg
http://img42.imageshack.us/img42/9210/p1040847k.th.jpg
There is one additional photos on which I show how did re-organized the crossover placement so I could make the cable going to the treble and energy selector much shorter. You can also see my new wires which I added instead of the original ones. I could also nicely clean the 4pin connector so I will use them.
http://img831.imageshack.us/img831/5...040845c.th.jpg
Nice work, László - I'm sure that will make quite a difference! :)
Marco.
Thanks :-) I hope that it will make a big difference. The only problem that I did not carry these modification out one after another so I could see the difference and know which made the biggest improvement. Unfortunately I don't have time to take it apart then change something again, then again...Quote:
Originally Posted by Marco
I wonder how much improvement would bring the cleaning of the switches...
I am almost done with the second speaker. This one went much faster as I already knew how to take things apart and which was is the best to clean.
The only thing that is needed to solder in the new wires which are already cut into appropriate pieces.