New Ortofon RS-212D tonearm, chez Marco

Quote:

---

Originally Posted by Marco

Hi Jostein,



It's just like Martin says; a straightforward plug-in :)

If you're thinking of trying the Furutech, I can thoroughly recommend it. Never once have I introduced a Furutech product into my system and not been absolutely delighted with it. I use a number of their power connectors, to great effect.

The AG-12 is, quite simply, the most musically involving sounding tonearm cable I've heard. Basically, it gets the balance between analysis and 'musicality' spot on, so that one obtains forensic insight into recordings, and as a result can hear deep into the mix, without the presentation ever straying into being clinical.

If you can afford it, buy with confidence!

http://img542.imageshack.us/img542/8...onearmcabl.jpg


Available here: http://www.mains-cables-r-us.co.uk/t...237532913.html

I'm sure that David would give AoS members a little discount :cool:

Marco.

---

Thanks, I think I want to check out this one. :)

Just heard from Simon at HifiSound that my new SPU has arrived and will be with me on Wednesday! :yay: :yay:

Marco.

I shall be interested in how you find the new SPU, Marco, though I suspect that you now know you'll need a SUT capable of getting the absolute best from it.

Hi Martin,

Quote:

---

I shall be interested in how you find the new SPU, Marco, though I suspect that you now know you'll need a SUT capable of getting the absolute best from it.

---

Oh absolutely... I intend to upgrade my SUT to an A23 Homage T1, your Hashimoto or perhaps this Ortofon one, which looks intriguing, sometime next year, hopefully before Scalford:


http://img854.imageshack.us/img854/6...ntentimage.jpg http://img221.imageshack.us/img221/9...k20white20.jpg


http://www.ortofon.com/products/acce...mc-transformer

However, do remember that the loading provided by my A23 (SPU) SUT was completely unsuitable for your Shelter cartridge, which is why we got the result we did when we swapped over SUTs on Saturday.

My existing SUT sounded excellent with my old SPU, and I of course fully expect it to do the same with my new one :cool:

Btw, what did you think of the look of Paul's new SR7EHD T/T PSU?

Marco.

Quote:

---

Originally Posted by Marco

Btw, what did you think of the look of Paul's new SR7EHD T/T PSU?

---

Erm . . . Tirpitz? Nimitz? Another analogy for 'bloody huge and mean looking'?

Ha - you're not kidding!! Seriously, you simply *must* get one of these beasts, as it is an utter sonic revelation. You know that uncle Marco knows best... :eyebrows:

;)

Marco.

P.S Please note that all discussion on the Paul Hynes SR7EHD PSU have been moved to a separate thread in Strokes of Genius, which can be found here:

http://theartofsound.net/forum/showthread.php?t=14305

I'll be doing Paul's reg mods first, using the SR-5 adjusted to 27V. If that is successful then I will certainly look at getting an SR-7xx where xx appears to be changing by the month :)

Back to the OP. It's seeing your arm plate on Saturday that led me to do the same thing: I couldn't get enough arm height adjustment with the Mike New platter and the spacers that were used to jack up my Dynavector to overcome the edge between the two surfaces always bugged me. Then I saw that your plate (the same as mine) had been reversed to provide a step-up rather than a step-down in the centre section. Light dawned!

So tonight I removed the arm and plate and reversed the centre section to be a step-up and reassembled it all. Now the arm pillar chuck is bolted firmly to the plate without spacer nuts. I also have plenty of height adjustment so that I can run the Shelter very slightly nose down, as we discovered with your Ortofon that it plays rather well like that.

I didn't expect much improvement to be honest but wowee! It sounds fantastic, with more air and insight into the acoustic of the venue. And, mercy mercy, sibilance is reduced to being no issue at all. What an incredible gain for 40 mins work!

Nice one, Martin. You mentioned you were going to do that, so I'm glad it worked out :)

The question is, has the improvement you're hearing derived from reconfiguring the arm plate, running the Shelter slightly nose-down, or a combination of both? ;)

Marco.

Quote:

---

Originally Posted by MartinT

Back to the OP. It's seeing your arm plate on Saturday that led me to do the same thing: I couldn't get enough arm height adjustment with the Mike New platter and the spacers that were used to jack up my Dynavector to overcome the edge between the two surfaces always bugged me. Then I saw that your plate (the same as mine) had been reversed to provide a step-up rather than a step-down in the centre section. Light dawned!

So tonight I removed the arm and plate and reversed the centre section to be a step-up and reassembled it all. Now the arm pillar chuck is bolted firmly to the plate without spacer nuts. I also have plenty of height adjustment so that I can run the Shelter very slightly nose down, as we discovered with your Ortofon that it plays rather well like that.

I didn't expect much improvement to be honest but wowee! It sounds fantastic, with more air and insight into the acoustic of the venue. And, mercy mercy, sibilance is reduced to being no issue at all. What an incredible gain for 40 mins work!

---

Hi Martin,
I've always said that vta / height adjust angle can make a big difference for the better in my experience with my 2M Black which is very suseptible to this (get it right = WOW !!, get it wrong = a bit dull and overly laid back) hence I love the fly on the wheel vta of the stock arm. Some dismiss the influence of it's effect but I always go with my own experience, a bit like Marco's utterences re: trusting his ears :lol: Absolutely right !! - Glad for you Martin, It's one of those sweet moments :)