Celestion SL-6 new tape for tweeter
Hi
I could not find anything under 3mm in draught weather strips. Clark Rubber has stores on the Gold Coast.
https://www.clarkrubber.com.au/produ...tape-3mm-black
I got the closed cell foam tape in 0.8mm, its quite thick and i am not sure if it would compress much once i screw the tweeter to the frame. It has a good rating. I am not sure whether to just attempt to see how much it compresses however i am worried about the fine copper wire breaking as i don't have much left on the dome as you can see.
https://au.element14.com/multicomp-p...5mm/dp/7224825
In the Tesa range there is some 0.2mm tapes at Element14 , example to carpet adesive, maybe not suited to this purpose.
Speaker business gasket tape not sure of the thickness.
https://www.theloudspeakerkit.com/fo...e-single-sided
The MS polymer Silicone i tried it and it was a bit messy hence the patches on the copper dome.
https://ibb.co/DHSV0Pqs
the copper dome
https://ibb.co/m51VW1Yb
The old tape, very thin but could have been compressed with screwed to the tweeter and frame
https://ibb.co/1GCWwrnG
The frame with the new closed cell tape - maybe it will compress more under screwing
https://ibb.co/V0S1n45r
the copper dome frame which sits on the tweeter, the extra thickness of the closed cell tape, again hopefully will compress. I can't test as i am afraid to break what's left if the super fine Litz wire. I plan to use old earphone wire or 32awg ptfe wire, but it could be too thick.
https://i.ibb.co/cKFBfnVM/P1600868.jpg
Thanks Sam
