View Full Version : Recommendation for xlr headphone cable? ta.
New preamp uses a pair of its XLR outputs to drive headphones,
https://img.usaudiomart.com/uploads/large/5320663-7e3001f4-holo-audio-serene-kte-preamp.jpg
so I'm looking for a balanced 2 x 3pin XLR female to 1 x 4 pin female adapter cable.
This will let me hook up the headphones using a standard 4 pin balanced cable.
Any reccomendations folks?
Thanks.
Were it I, I would make up the cable myself, but unless you are nifty with a soldering iron, I would suggest you try designacable.com .
They can make up any cable on request using quality connector, such as Neutrik, with a range of quality cable offered. They are fast and the costs are quite reasonable.
I wouldn't like to recommend any particular cable, save to say that for headphone use it should be fairly long (say at least 4 metre; depending on how close you will be sitting from the headphone amp) and it should be very flexible.
I would recommend Van Damme 'Contractor' shotgun-style twin balanced line cable. This option is offered by designacable.com.
Thanks Barry,
I'll give Designacable a look.
Lawrence001
31-08-2025, 19:27
New preamp uses a pair of its XLR outputs to drive headphones,
https://img.usaudiomart.com/uploads/large/5320663-7e3001f4-holo-audio-serene-kte-preamp.jpg
so I'm looking for a balanced 2 x 3pin XLR female to 1 x 4 pin female adapter cable.
This will let me hook up the headphones using a standard 4 pin balanced cable.
Any reccomendations folks?
Thanks.What's the model Gary I've not seen a pre with that type of headphone out. I do have a pair of monobloc valve headphone amps with that configuration, I think I bought a cable off eBay for them I'll try and dig it out and have a look. I haven't used it for years, silly really.
What's the model Gary I've not seen a pre with that type of headphone out. I do have a pair of monobloc valve headphone amps with that configuration, I think I bought a cable off eBay for them I'll try and dig it out and have a look. I haven't used it for years, silly really.
Its a Holo Audio Serene KTE preamp Lawrence.
A good match for my May dac, apparently was designed specifically for it.
Unusual headphone setup though!
Lawrence001
01-09-2025, 23:50
Nice pre! The one I bought was similar to this
https://ebay.us/m/I2j0P9
Exactly what I’m after,
thanks Lawrence
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.