PDA

View Full Version : Ortofon MC30 Supreme



karma1967
28-04-2024, 15:30
I bought this as a stop gap whilst my Cadenza Bronze was being looked over,Purchased from Hifihanger and described as very low hours.

In good condition.

£295 including postage.

https://i.imgur.com/PyGRVud.jpeg

https://i.imgur.com/97QsRly.jpeg

https://i.imgur.com/UVp8Mob.jpeg

https://i.imgur.com/EEQaV3W.jpeg

https://i.imgur.com/2SjUDJl.jpeg

https://i.imgur.com/F38biZR.jpeg

karma1967
29-04-2024, 16:55
evening bump for a great cartridge!

vinylmagic
30-04-2024, 11:24
Hi

What's the loading requirement for this. I'm looking at getting a vintage Rotel Pre with a MC input.

Sent from my SM-S918B using Tapatalk

karma1967
30-04-2024, 15:51
google is your friend but i think i had it on 50 ohms

Barry
01-05-2024, 16:35
MC 30 Supreme


Output voltage at 1000 Hz, 5cm/sec.: > 500 µV


Channel balance at 1 kHz: < 1.0 dB


Channel separation at 1 kHz: > 27 dB


Frequency response: 20-40.000 Hz


Tracking ability (315Hz, lateral): > 80 µm


Compliance, dynamic (lateral): 16 µm/mN


Stylus type: Super Nude Fine Line


Stylus tip radius: r/R 8/60 µm


Tracking force range: 1.8-2.2 g (18-22 mN)


Tracking force, recommended: 2.0 g (20 mN)


Tracking angle (vertical): 20°


Internal impedance: 5 Ohm


Recommended load impedance: > 20 Ohm


Cartridge weight: 10.7 g



GLWS

karma1967
02-05-2024, 06:19
thanks barry.

sq225917
03-05-2024, 16:33
They were great carts, lovely tip, a precursor to the replicant.

karma1967
03-05-2024, 17:59
indeed,to the top and open to offers.

karma1967
08-05-2024, 16:28
bump