FS: Lenco GL75 Bearing - Wakefield Turntables Modified

[Wakefield Turntables]

I have another bearing for sale.

£40 Delivered - POSTAGE INCLUDED (UK ONLY) - Will post Worldwide but buyer pays for all additional extra fees.

So, just to refresh what I do with them :

* Bearings full stripped.
* Spindle cleaned ultrasonically, all scratches removed, polished 1000 to 5000 wet and dry.
* Bearing body - soaked 24 hours in degreasing cleaners, soaked another 24 hours in de-oiling cleaners.
* Bearng body Ultrasonically cleaned and then polished.
* Thrust pad - Replaced with Wakefield Turntables thrust pad.
* Bearing - Upgraded to Silicone Nitride
* Plastic base cap - Gently cleaned .
* Felt washer - Replaced with new Wakefield Turntables felt washer
* Spindle locking screw - Ultrasonically cleaned and then repainted/sealed.
* Mounting screws - Ultrasonically cleaned and polished.
* Oil - Special oil designed by martin bastin used to reoil the bearings.


Here's some pictures of another one that I finished today.



https://i.ibb.co/tx29Vbw/IMG-0613.jpg



https://i.ibb.co/L5GmSNq/IMG-0615.jpg



https://i.ibb.co/KLd4fpj/IMG-0612.jpg







The last three bearings have found homes in the UK, USA & NZ.

[Jimbo]

Andy, do you clean and refurbish a GL75 bearing supplied by a customer?

[Wakefield Turntables]

I can do either. I can supply a bearing (I have two in stock), or I can do all the work on a supplied bearing from the customer. I've had a few people ask for a supplied bearing from myself for comparison against there old bearing. Some folks like to do this fun.

[Jimbo]

I can do either. I can supply a bearing (I have two in stock), or I can do all the work on a supplied bearing from the customer. I've had a few people ask for a supplied bearing from myself for comparison against there old bearing. Some folks like to do this fun.

Thats useful to know.