View Full Version : Wanted, Tonearm for Garrard Zero 100
Hello,
A long time ago (but not in a Galaxy far away!), I bought a Garrard Zero 100.
I promptly stripped off all the auto and return mechanisms (I don't want all that stuff), and the poor spindle bearing.
I am in the process of making up a nice new spindle bearing for it on my lathe.
I want to replace the Tangential Tonearm because the bearings are shot and it is all loose and wobbly as heck.
I'm looking at the Project Genie S (at £75 new) or Carbon (at £115 new) arms.
But, if anyone has something better for sale at around the price of the Carbon arm I would be very much interested.
Many thanks, Mark.https://uploads.tapatalk-cdn.com/20230423/1fcd48a39ad5dce1cb8d6b158a742f6c.jpghttps://uploads.tapatalk-cdn.com/20230423/4a3cc071feafbe412899cd688c4795f4.jpghttps://uploads.tapatalk-cdn.com/20230423/9613fec2126278b4970d22becaae5eae.jpg
Sent from my Pixel 7 Pro using Tapatalk
dave2010
25-04-2023, 08:18
An interesting but odd project. I'm not quite sure why you are doing or wanting to do this, but I'm interested to see/hear how it goes. Please keep us up to date.
An interesting but odd project. I'm not quite sure why you are doing or wanting to do this, but I'm interested to see/hear how it goes. Please keep us up to date.
Because as Mark says: "I want to replace the Tangential Tonearm because the bearings are shot and it is all loose and wobbly as heck."
The last thing you want in a tonearm, and I suspect the arm is irrepairable.
walpurgis
25-04-2023, 16:01
I found the Zero 100 arm bearings had a sloppiness to them when the deck was new. Reviewers commented on this at the time.
I just think the Direct Drive heart of this TT, with all the auto gubbins taken away and with a better spindle bearing (which I'm manufacturing) should make for a really nice TT, in a good solid plinth...
Sent from my Pixel 7 Pro using Tapatalk
I have a nice Japanese Jelco made arm which has nice smooth bearings and an SME type headshell fitting.
Available for £80.
https://i.postimg.cc/0y1sG4tM/A467-AF64-8-E7-E-4049-BF41-B5441-CB02-E73.jpg (https://postimg.cc/0bnFPV1P)
I have a nice Japanese Jelco made arm which has nice smooth bearings and an SME type headshell fitting.
Available for £80.
https://i.postimg.cc/0y1sG4tM/A467-AF64-8-E7-E-4049-BF41-B5441-CB02-E73.jpg (https://postimg.cc/0bnFPV1P)That looks nice.
What is the height please from the base of the mount to the centre of the bearing?
Thanks, Mark.
Sent from my Pixel 7 Pro using Tapatalk
That looks nice.
What is the height please from the base of the mount to the centre of the bearing?
Thanks, Mark.
Sent from my Pixel 7 Pro using Tapatalk
It is adjustable up and down. There is a base collar which the arm stem moves up and down in to adjust to required height.
I can take more photos in day light tomorrow if required.
It is adjustable up and down. There is a base collar which the arm stem moves up and down in to adjust to required height.
I can take more photos in day light tomorrow if required.I'd be grateful - I just want to be sure it isn't higher at its lowest than the tangential arm on the TT, so I'd appreciate a measurement at its lowest setting please...
Sent from my Pixel 7 Pro using Tapatalk
I'd be grateful - I just want to be sure it isn't higher at its lowest than the tangential arm on the TT, so I'd appreciate a measurement at its lowest setting please...
Sent from my Pixel 7 Pro using Tapatalk
So, from the base on the deck to the bottom of the arm tube is 40mm.
Hope this makes sense?
So, from the base on the deck to the bottom of the arm tube is 40mm.
Hope this makes sense?Is that at its lowest adjustment height?
Many thanks ..
Sent from my Pixel 7 Pro using Tapatalk
Is that at its lowest adjustment height?
Many thanks ..
Sent from my Pixel 7 Pro using Tapatalk
Yes, you might get 2mm less (38mm lowest point) depending on how you look at the tape measure!
Yes, you might get 2mm less (38mm lowest point) depending on how you look at the tape measure!Sounds great. I'm assuming it is wired?
Sent from my Pixel 7 Pro using Tapatalk
Sounds great. I'm assuming it is wired?
Sent from my Pixel 7 Pro using Tapatalk
Yes, see pics below.
Incidentally, I have tried to Pm you, but your inbox/outbox is full.
https://i.postimg.cc/yYLRkw7K/5-AF97-E8-E-8287-469-E-A08-E-D007-F625-EE98.jpg (https://postimg.cc/fJ0yPq3q)
https://i.postimg.cc/CxdqDmKq/4-B3-F0576-142-F-4-F96-8051-8-EF660585-BA5.jpg (https://postimg.cc/DSk03QLv)
https://i.postimg.cc/fRgYg1PC/EE43-A2-CD-04-AF-4-D29-81-BA-18-B84-F4-C98-AF.jpg (https://postimg.cc/bZkGZVpS)
Perfect.
Sent from my Pixel 7 Pro using Tapatalk
Sorry, I've emptied both...
Sent from my Pixel 7 Pro using Tapatalk
Sorry, I've emptied both...
Sent from my Pixel 7 Pro using Tapatalk
PM sent.
PM sent.Did you get my reply?
Sent from my Pixel 7 Pro using Tapatalk
Did you get my reply?
Sent from my Pixel 7 Pro using Tapatalk
PM just sent.
Thanks!
Sent from my Pixel 7 Pro using Tapatalk
Hi Monty, did you get my PM? - I sent you the money yesterday...
Sent from my Pixel 7 Pro using Tapatalk
Hi Monty, did you get my PM? - I sent you the money yesterday...
Sent from my Pixel 7 Pro using Tapatalk
Hi Mark,
Check your inbox, message replied to last night.
Parcel on it’s way later this morning....
Awesome, thanks. I don't seem to get message notifications any more!
Sent from my Pixel 7 Pro using Tapatalk
All sorted, arrived safe, many thanks...
Sent from my Pixel 7 Pro using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.