Magna Audio
06-03-2023, 14:24
Several orders for Tannoy GRF style cabinets have come in!
Here's a regular rectangular cabinet in the making.
These will take a pair of 15" HPD eight mounting hole drivers.
Made from 24mm (all external panels) and 21mm premium faced dense birch plywood.
Panels for one cabinet, cut, machined and sanded to finished level.
https://uploads.tapatalk-cdn.com/20230306/7d2bf39bab0c2f02f6ccfa30be6ebb1a.jpg
https://uploads.tapatalk-cdn.com/20230306/f88361d42a5f30bd45cb87fde0bf0bdd.jpg
Build underway
https://uploads.tapatalk-cdn.com/20230306/398fdb97a1b769386006af0df2c35d18.jpg
Driver mounting plate and inner baffle in.
https://uploads.tapatalk-cdn.com/20230306/859d416946048275210964fecda558da.jpg
Teardrop baffle creation.
https://uploads.tapatalk-cdn.com/20230306/628c71a2baed0f6291cefea97045d3cd.jpg
Felt fitted and sides on
https://uploads.tapatalk-cdn.com/20230306/388cfc40324b8bd3e8365c9baff4d940.jpg
Close ups of fit and panel alignment
https://uploads.tapatalk-cdn.com/20230306/25db57050d83f45b056140bf5389ce39.jpg
https://uploads.tapatalk-cdn.com/20230306/2c294a44f729eb29b945cbef7dc0951c.jpg
Base on
https://uploads.tapatalk-cdn.com/20230306/e9d06c8cbb74b3c3cac4e28ff8d04505.jpg
Top on and rear panel trial fitted.
Pound coin in bottom right corner shows the scale
https://uploads.tapatalk-cdn.com/20230306/0dacac388b8216fb1647e69aea3a1133.jpg
Next up, 2nd cab build.
Then onto plinths, removable rear panel fixings etc.
Here's a regular rectangular cabinet in the making.
These will take a pair of 15" HPD eight mounting hole drivers.
Made from 24mm (all external panels) and 21mm premium faced dense birch plywood.
Panels for one cabinet, cut, machined and sanded to finished level.
https://uploads.tapatalk-cdn.com/20230306/7d2bf39bab0c2f02f6ccfa30be6ebb1a.jpg
https://uploads.tapatalk-cdn.com/20230306/f88361d42a5f30bd45cb87fde0bf0bdd.jpg
Build underway
https://uploads.tapatalk-cdn.com/20230306/398fdb97a1b769386006af0df2c35d18.jpg
Driver mounting plate and inner baffle in.
https://uploads.tapatalk-cdn.com/20230306/859d416946048275210964fecda558da.jpg
Teardrop baffle creation.
https://uploads.tapatalk-cdn.com/20230306/628c71a2baed0f6291cefea97045d3cd.jpg
Felt fitted and sides on
https://uploads.tapatalk-cdn.com/20230306/388cfc40324b8bd3e8365c9baff4d940.jpg
Close ups of fit and panel alignment
https://uploads.tapatalk-cdn.com/20230306/25db57050d83f45b056140bf5389ce39.jpg
https://uploads.tapatalk-cdn.com/20230306/2c294a44f729eb29b945cbef7dc0951c.jpg
Base on
https://uploads.tapatalk-cdn.com/20230306/e9d06c8cbb74b3c3cac4e28ff8d04505.jpg
Top on and rear panel trial fitted.
Pound coin in bottom right corner shows the scale
https://uploads.tapatalk-cdn.com/20230306/0dacac388b8216fb1647e69aea3a1133.jpg
Next up, 2nd cab build.
Then onto plinths, removable rear panel fixings etc.