Rel Subwoofer cable (RCA to Speakon) 3m [Archive]

Lawrence001

30-11-2022, 16:16

Had this made up for me and never used it. I had it made in Kelsey ATM OFC cable as recommended.

It has one more ground RCA than needed as I thought why not of there are 4 wires in the cable. You can snip it off if you want.

£30 plus postage if any use to someone?https://uploads.tapatalk-cdn.com/20221130/da41776308bd80efbfa6b8c4731c9c38.jpg

Qwin

11-01-2023, 16:23

Those are banana plugs not RCA's.

Vince

11-01-2023, 18:24

You can connect an earth to both right and left channels. This actually had the potential to be superior to a 3 wire, single earth as each channel has it's own earth.
Either way.....It will be vastly superior to the one Rel supply as standard.
Glws

Qwin

11-01-2023, 18:36

You can connect an earth to both right and left channels. This actually had the potential to be superior to a 3 wire, single earth as each channel has it's own earth.
Either way.....It will be vastly superior to the one Rel supply as standard.
Glws

That rather depends on how REL have their Subs panel socket wired.
If there is no connection to the New pin, that is being used, it wont do anything.
The earths are probably summed at the chassis anyway, so no electrical advantage, but I might be wrong.

Lawrence001

11-01-2023, 19:44

Those are banana plugs not RCA's.Doh was writing an ad for some interconnects at the same time and confused myself [emoji23]

Vince

14-01-2023, 16:18

I was on about the quality of the supplied cable when I said it will be superior. The wire in the Rel cable is cheap and nasty. I made my own out of some Ixos RGB cable and the difference was immense. The tune, depth and speed all improved.
Glws

Vince

14-01-2023, 16:34

Sod it.........pm sent

Qwin

15-01-2023, 07:44

I was on about the quality of the supplied cable when I said it will be superior. The wire in the Rel cable is cheap and nasty. I made my own out of some Ixos RGB cable and the difference was immense. The tune, depth and speed all improved.
Glws

Thanks, that's good to know, I've been looking at REL subs myself and the whole high level v low level feed. BK Electronics also promote using High Level input, but then they did used to make for REL in the early days.

Lawrence001

17-02-2023, 12:21

Sold to Vince, thanks mate