Magna Audio
28-08-2010, 13:44
Made this pair completely freehand - no pre-cutting or CNC work by any timber merchant.
Just mark out - and mark with carpenters kinfe and then circ saw/ jig saw by hand and finish with belt and orbital and drum sander... It can be done but it does take ages!!!
This time I chose a clear satin tung oil rich varnish which give a mellow finish.
First up my HPD's with silver bolts
http://inlinethumb09.webshots.com/20168/2914705220071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2914705220071997495vGdjCH)
Then Mozza's Golds in them for a test of Golds vs HPDs done a couple of weeks backs.
http://inlinethumb20.webshots.com/46099/2412873780071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2412873780071997495SeXGmU)
Full length grilles at present secured by felt pads under pressure top and bottom
http://inlinethumb07.webshots.com/47046/2850837960071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2850837960071997495NYvdGH)
http://inlinethumb23.webshots.com/46102/2583478090071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2583478090071997495DXjgaN)
I have thought about having black screw heads and a chap who is interested in me making a pair of cabs for him said "would look even better with black screws"... That was yesterday, so I whizzed up 2 sets
http://inlinethumb47.webshots.com/6702/2582200830071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2582200830071997495RVaOia)
http://inlinethumb32.webshots.com/33375/2531947000071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2531947000071997495KRrNFq)
Finally the adjustable bass tuning felt I add in the rear of the cabs...
http://inlinethumb11.webshots.com/40650/2820244350071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2820244350071997495CPzvId)
Note - cab is upside down
All in all a very enjoyable project and these are my keepers for the time being - I am seriously prospecting making a pair of large Autographs:-)
Just mark out - and mark with carpenters kinfe and then circ saw/ jig saw by hand and finish with belt and orbital and drum sander... It can be done but it does take ages!!!
This time I chose a clear satin tung oil rich varnish which give a mellow finish.
First up my HPD's with silver bolts
http://inlinethumb09.webshots.com/20168/2914705220071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2914705220071997495vGdjCH)
Then Mozza's Golds in them for a test of Golds vs HPDs done a couple of weeks backs.
http://inlinethumb20.webshots.com/46099/2412873780071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2412873780071997495SeXGmU)
Full length grilles at present secured by felt pads under pressure top and bottom
http://inlinethumb07.webshots.com/47046/2850837960071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2850837960071997495NYvdGH)
http://inlinethumb23.webshots.com/46102/2583478090071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2583478090071997495DXjgaN)
I have thought about having black screw heads and a chap who is interested in me making a pair of cabs for him said "would look even better with black screws"... That was yesterday, so I whizzed up 2 sets
http://inlinethumb47.webshots.com/6702/2582200830071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2582200830071997495RVaOia)
http://inlinethumb32.webshots.com/33375/2531947000071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2531947000071997495KRrNFq)
Finally the adjustable bass tuning felt I add in the rear of the cabs...
http://inlinethumb11.webshots.com/40650/2820244350071997495S600x600Q85.jpg (http://entertainment.webshots.com/photo/2820244350071997495CPzvId)
Note - cab is upside down
All in all a very enjoyable project and these are my keepers for the time being - I am seriously prospecting making a pair of large Autographs:-)