camtwister
31-03-2022, 11:52
https://i.postimg.cc/NG2YFH70/1604844158232.jpg (https://postimg.cc/c6WP56zq)
For private sale is a Yamaha MX-1 power amplifier.
It's 25kg of solid state, capable of driving loads at two ohms.
The asking price is £799.
http://www.thevintageknob.org/yamaha-MX-1.html
https://stereonomono.blogspot.com/20...-19931994.html
The MX-1 was tested for correct operation in October 2020 by Alan Kendal.
The amp was biased to Yamaha specifications. (I have the service manual.)
All components were tested to be within tolerance.
The amplifier was put into storage after the inspection and has not been used since.
The amp is 25 years old.
This unit is a 230V European model. I'm informed that the design factors are sufficiently wide for operation at 240V to be within safe margin.
Ideally, collection from Cardiff.
Payment via PayPal, please.
Carriage is extra, and because of the value and mass of the unit, I'm willing to arrange for a self-employed courier to collect it from my place and deliver to your door, in a car and with care (mainland UK).
I'll ask for £65 towards the cost of this and cover the rest of the expense myself.
Please get in touch if you wish to discuss more about the MX-1.
https://www.hifiengine.com/manual_li...aha/mx-1.shtml
Specs:
200 W (8 Ω) from 20 to 20,000 Hz at no more than 0.008% THD
260 W (4 Ω) from 20 to 20,000 Hz at no more than 0.03% THD
320 W (2 Ω) from 20 to 20,000 Hz at no more than 0.09% THD
Input Sensitivity/Impedance (Main IN): 1.46 V/20 kΩ
Damping Factor
(SPA, 8Ω, 20 - 20,000 Hz) : 350
(8Ω, 1 kHz) : 250
Dynamic Power per Channel (by IHF Dynamic headroom Measuring Method):
280 W at 8 ohms
460 W at 6 ohms
630 W at 2 ohms
Dynamic Headroom :
1.46 dB at 8 ohms
2.48 dB at 6 ohms
2.94 dB at 2 ohms
Power Bandwidth (8Ω, 0.03% THD, half Rated Power): 10 to 60,000 Hz
Frequency Response (Main In): 20 to 20,000 Hz, ±0.5 dB
Signal-to-Noise Ratio (IHF-A-Network): 125 dB (Main In, Shorted)
Residual Noise (IHF-A-Network): 20 μV
Channel Separation (Vol -30 dB, Main In, Input 5.1 kΩ terminaled)
1 kHz/10 kHz : 80 dB/ 60 dB
Dimensions (W x H x D): 438 x 116 x 486 mm (17-1/4 x 4-9/16 x 19-1/8 inch)
Weight: 24kg (52 lbs, 14 oz)
https://i.postimg.cc/dtMFyV4j/1604844158233.jpg (https://postimg.cc/0rChgPgz)
https://i.postimg.cc/rpYXFVDW/1604844158238.jpg (https://postimg.cc/qtnZ1dXM)
https://i.postimg.cc/J0Z9qjPc/1604844158239.jpg (https://postimg.cc/2LjcjLpV)
https://i.postimg.cc/6pcxgLwM/1604844158236.jpg (https://postimg.cc/XrrPy5r5)
https://i.postimg.cc/bNQhHf5c/1604844158235.jpg (https://postimg.cc/CzLXSXYm)
https://i.postimg.cc/nzgJTFZZ/1604844158229.jpg (https://postimg.cc/R67yZzNb)
https://i.postimg.cc/yNxtGMLN/1604844158243.jpg (https://postimg.cc/JywpD2Vw)
https://i.postimg.cc/4NvDHbKX/1604844158241.jpg (https://postimg.cc/Tpw7Zbqs)
https://i.postimg.cc/wj0n0qcP/1604844158242.jpg (https://postimg.cc/tsnrgHct)
For private sale is a Yamaha MX-1 power amplifier.
It's 25kg of solid state, capable of driving loads at two ohms.
The asking price is £799.
http://www.thevintageknob.org/yamaha-MX-1.html
https://stereonomono.blogspot.com/20...-19931994.html
The MX-1 was tested for correct operation in October 2020 by Alan Kendal.
The amp was biased to Yamaha specifications. (I have the service manual.)
All components were tested to be within tolerance.
The amplifier was put into storage after the inspection and has not been used since.
The amp is 25 years old.
This unit is a 230V European model. I'm informed that the design factors are sufficiently wide for operation at 240V to be within safe margin.
Ideally, collection from Cardiff.
Payment via PayPal, please.
Carriage is extra, and because of the value and mass of the unit, I'm willing to arrange for a self-employed courier to collect it from my place and deliver to your door, in a car and with care (mainland UK).
I'll ask for £65 towards the cost of this and cover the rest of the expense myself.
Please get in touch if you wish to discuss more about the MX-1.
https://www.hifiengine.com/manual_li...aha/mx-1.shtml
Specs:
200 W (8 Ω) from 20 to 20,000 Hz at no more than 0.008% THD
260 W (4 Ω) from 20 to 20,000 Hz at no more than 0.03% THD
320 W (2 Ω) from 20 to 20,000 Hz at no more than 0.09% THD
Input Sensitivity/Impedance (Main IN): 1.46 V/20 kΩ
Damping Factor
(SPA, 8Ω, 20 - 20,000 Hz) : 350
(8Ω, 1 kHz) : 250
Dynamic Power per Channel (by IHF Dynamic headroom Measuring Method):
280 W at 8 ohms
460 W at 6 ohms
630 W at 2 ohms
Dynamic Headroom :
1.46 dB at 8 ohms
2.48 dB at 6 ohms
2.94 dB at 2 ohms
Power Bandwidth (8Ω, 0.03% THD, half Rated Power): 10 to 60,000 Hz
Frequency Response (Main In): 20 to 20,000 Hz, ±0.5 dB
Signal-to-Noise Ratio (IHF-A-Network): 125 dB (Main In, Shorted)
Residual Noise (IHF-A-Network): 20 μV
Channel Separation (Vol -30 dB, Main In, Input 5.1 kΩ terminaled)
1 kHz/10 kHz : 80 dB/ 60 dB
Dimensions (W x H x D): 438 x 116 x 486 mm (17-1/4 x 4-9/16 x 19-1/8 inch)
Weight: 24kg (52 lbs, 14 oz)
https://i.postimg.cc/dtMFyV4j/1604844158233.jpg (https://postimg.cc/0rChgPgz)
https://i.postimg.cc/rpYXFVDW/1604844158238.jpg (https://postimg.cc/qtnZ1dXM)
https://i.postimg.cc/J0Z9qjPc/1604844158239.jpg (https://postimg.cc/2LjcjLpV)
https://i.postimg.cc/6pcxgLwM/1604844158236.jpg (https://postimg.cc/XrrPy5r5)
https://i.postimg.cc/bNQhHf5c/1604844158235.jpg (https://postimg.cc/CzLXSXYm)
https://i.postimg.cc/nzgJTFZZ/1604844158229.jpg (https://postimg.cc/R67yZzNb)
https://i.postimg.cc/yNxtGMLN/1604844158243.jpg (https://postimg.cc/JywpD2Vw)
https://i.postimg.cc/4NvDHbKX/1604844158241.jpg (https://postimg.cc/Tpw7Zbqs)
https://i.postimg.cc/wj0n0qcP/1604844158242.jpg (https://postimg.cc/tsnrgHct)