scotty67
27-01-2022, 12:49
I used this psu to replace the wall wart powering my Thorens td309 to good effect.
This is the single output version.
Please see attached information from an Audiogon listing.
It’s very heavy for such a small box!
Looking for £sold delivered.
Please check it will work with your component.
Unfortunately I won’t be able to confirm what it will power other than my Thorens.
Awarded Audiophilia Star Component.
Unlock the potential of any component with Mojo Audio’s ultralow-noise power supplies. Upgrading the stock "wall wart" or "brick" style switch-mode power supply on your components will improve performance significantly. Plug-and-play upgrades for most components with external power supplies.
45-day no-risk audition.
When the distortion caused by power supply noise is removed, you will see and hear higher contrasts and more low-level detail than ever before. Harmonic content and articulation improves, and the dynamic range and frequency response expands. Layers of subtlety and nuance are revealed.
__________________________________________________ ___________________________
Original manufacturer's 1-year warranty.
Note that the $599.95 price is for a used Joule v5.0 power supply in Basic Black or with machined silver face plate (your choice). Comes with a new high-performance DC power cable mated to your specific component. Since this power supply has been used it may have subtle cosmetic imperfections. AC power cable, Internal Filter Module, and shipping are additional.
__________________________________________________ ____________________________
Single or dual output options:
Basic Black or with silver machined face plate (same price).
Single regulated single output (listing price).
Single regulated dual output (+$50 for two components of the same voltage).
Dual regulated dual output (+$250 can be fixed or adjustable voltage).
Available in any international AC voltage, from 100VAC to 250VAC.
__________________________________________________ ____________________________
An ideal replacement for power supplies on:
Mac Minis of all ages
CAPS music servers
Pico-ITX type HTPC computers
microZOTL and other headphone amps
Intel NUC, Gigabite Brix, and Raspberry Pi
Regenerators, reclockers, and other USB devices.
USB cards and USB to S/PDIF or I2S converters
Music-streamers (LANRover, microRendu, etc.)
Phono stages
Cross-overs
External drives, NAS, and RAID arrays
DACs, ADCs, DAWs and other digital converters
Naim, Wired4Sound, Baetis, and other servers.
Routers, switches, and other network devices
Our Joule v5.0 is a plug-and-play upgrade for most components with wall wart or brick type external power supplies. We make custom DC power cables in normal and high-current configurations to fit almost any specification.
If you require a special connector that is not shown on our website please contact us.
To power multiple components we offer an optional second regulated power output and dual DC power cables with up to 10A of continuous power.
__________________________________________________ ____________________________
Features and Specifications:
Less noise than a LiO4 battery.
Less than 50uV of peak-to-peak noise/ripple.
Less than 10uS settling time from zero to full output.
Up to 7 amps continuous power with up to 10 amp peaks.
Hot parts are heat sunk to and dissipated through the entire chassis.
Sophisticated AC filtering - no power conditioners are required.
Cascaded spread spectrum capacitive filtering for expanded bandwidth.
DC ground lift option allows separating AC and DC grounding.
Easily converted from 115V to 230V AC at IEC inlet.
We use only the highest-quality parts:
Belleson ultralow-noise high-dynamic regulators.
Organic polymer capacitors with ESR as low as 7mOhms.
High-frequency MLCC capacitors to filter beyond 3GHz.
IXYS ultrafast soft recovery Hexfred diode bridge.
Laboratory grade filtered/fused/switched AC power inlet.
Neutrik silver-plated 10A + 10A XLR DC power outlets.
Ultra-heavy gauge .125" thick all-aluminum chassis.
All non-magnetic stainless steel PEMs and hardware.
Durable high-temp powder coating inside and out.
Sorbothane or adjustable spiked anti-resonant feet.
This is the single output version.
Please see attached information from an Audiogon listing.
It’s very heavy for such a small box!
Looking for £sold delivered.
Please check it will work with your component.
Unfortunately I won’t be able to confirm what it will power other than my Thorens.
Awarded Audiophilia Star Component.
Unlock the potential of any component with Mojo Audio’s ultralow-noise power supplies. Upgrading the stock "wall wart" or "brick" style switch-mode power supply on your components will improve performance significantly. Plug-and-play upgrades for most components with external power supplies.
45-day no-risk audition.
When the distortion caused by power supply noise is removed, you will see and hear higher contrasts and more low-level detail than ever before. Harmonic content and articulation improves, and the dynamic range and frequency response expands. Layers of subtlety and nuance are revealed.
__________________________________________________ ___________________________
Original manufacturer's 1-year warranty.
Note that the $599.95 price is for a used Joule v5.0 power supply in Basic Black or with machined silver face plate (your choice). Comes with a new high-performance DC power cable mated to your specific component. Since this power supply has been used it may have subtle cosmetic imperfections. AC power cable, Internal Filter Module, and shipping are additional.
__________________________________________________ ____________________________
Single or dual output options:
Basic Black or with silver machined face plate (same price).
Single regulated single output (listing price).
Single regulated dual output (+$50 for two components of the same voltage).
Dual regulated dual output (+$250 can be fixed or adjustable voltage).
Available in any international AC voltage, from 100VAC to 250VAC.
__________________________________________________ ____________________________
An ideal replacement for power supplies on:
Mac Minis of all ages
CAPS music servers
Pico-ITX type HTPC computers
microZOTL and other headphone amps
Intel NUC, Gigabite Brix, and Raspberry Pi
Regenerators, reclockers, and other USB devices.
USB cards and USB to S/PDIF or I2S converters
Music-streamers (LANRover, microRendu, etc.)
Phono stages
Cross-overs
External drives, NAS, and RAID arrays
DACs, ADCs, DAWs and other digital converters
Naim, Wired4Sound, Baetis, and other servers.
Routers, switches, and other network devices
Our Joule v5.0 is a plug-and-play upgrade for most components with wall wart or brick type external power supplies. We make custom DC power cables in normal and high-current configurations to fit almost any specification.
If you require a special connector that is not shown on our website please contact us.
To power multiple components we offer an optional second regulated power output and dual DC power cables with up to 10A of continuous power.
__________________________________________________ ____________________________
Features and Specifications:
Less noise than a LiO4 battery.
Less than 50uV of peak-to-peak noise/ripple.
Less than 10uS settling time from zero to full output.
Up to 7 amps continuous power with up to 10 amp peaks.
Hot parts are heat sunk to and dissipated through the entire chassis.
Sophisticated AC filtering - no power conditioners are required.
Cascaded spread spectrum capacitive filtering for expanded bandwidth.
DC ground lift option allows separating AC and DC grounding.
Easily converted from 115V to 230V AC at IEC inlet.
We use only the highest-quality parts:
Belleson ultralow-noise high-dynamic regulators.
Organic polymer capacitors with ESR as low as 7mOhms.
High-frequency MLCC capacitors to filter beyond 3GHz.
IXYS ultrafast soft recovery Hexfred diode bridge.
Laboratory grade filtered/fused/switched AC power inlet.
Neutrik silver-plated 10A + 10A XLR DC power outlets.
Ultra-heavy gauge .125" thick all-aluminum chassis.
All non-magnetic stainless steel PEMs and hardware.
Durable high-temp powder coating inside and out.
Sorbothane or adjustable spiked anti-resonant feet.