yolakim
24-05-2021, 18:09
https://i.imgur.com/1jjQ39N.jpg?1
I've had this pre-amp for about 2 years and used it with the HiCap I also have for sale. Most recently, I've used it with the NA323S boards with an MC cartridge and it has done a remarkable job.
https://i.imgur.com/j1Uhqxx.jpg?1
The serial number (65580) dates this amp to 1991 I believe. It's in very good condition - the only marks I can see on the case are a couple of rings where the rubber feet of another Naim box was sat on top. I've not had the amp serviced and I have no service record. Unfortunately, I don't have the original box.
https://i.imgur.com/Jpvw4sZ.jpg?1
https://i.imgur.com/Wyg7wX4.jpg?1
The amp will be supplied with a range of cables and bits and pieces:
1.25m Naim 4-pin Snaic
1.25m Naim 5-pin Snaic
1.45m Chord Chrysalis DIN - RCA
0.25m female RCA - 5-pin DIN
0.1m 4-pin DIN to female RCA
Naim DIN blanking plug
2 x gold plated BNC to RCA adapters
https://i.imgur.com/1oHjmMW.jpg?1
The amp currently has the low output MC boards fitted, but will also come with a set of K boards (NA323K for Linn carts) and V boards (NA328 for variable high sensitivity inputs), though I've not used either can only assume they work fine.
https://i.imgur.com/ycj8a42.jpg?1https://i.imgur.com/ttokEoS.jpg?1
https://i.imgur.com/zZGgEgc.jpg?1https://i.imgur.com/NrAPZtE.jpg?1
https://i.imgur.com/9ecPTSh.jpg?1
I'd like £450 for this please. Shipping will be under £20 with UPS and it will be very well packed.
I've had this pre-amp for about 2 years and used it with the HiCap I also have for sale. Most recently, I've used it with the NA323S boards with an MC cartridge and it has done a remarkable job.
https://i.imgur.com/j1Uhqxx.jpg?1
The serial number (65580) dates this amp to 1991 I believe. It's in very good condition - the only marks I can see on the case are a couple of rings where the rubber feet of another Naim box was sat on top. I've not had the amp serviced and I have no service record. Unfortunately, I don't have the original box.
https://i.imgur.com/Jpvw4sZ.jpg?1
https://i.imgur.com/Wyg7wX4.jpg?1
The amp will be supplied with a range of cables and bits and pieces:
1.25m Naim 4-pin Snaic
1.25m Naim 5-pin Snaic
1.45m Chord Chrysalis DIN - RCA
0.25m female RCA - 5-pin DIN
0.1m 4-pin DIN to female RCA
Naim DIN blanking plug
2 x gold plated BNC to RCA adapters
https://i.imgur.com/1oHjmMW.jpg?1
The amp currently has the low output MC boards fitted, but will also come with a set of K boards (NA323K for Linn carts) and V boards (NA328 for variable high sensitivity inputs), though I've not used either can only assume they work fine.
https://i.imgur.com/ycj8a42.jpg?1https://i.imgur.com/ttokEoS.jpg?1
https://i.imgur.com/zZGgEgc.jpg?1https://i.imgur.com/NrAPZtE.jpg?1
https://i.imgur.com/9ecPTSh.jpg?1
I'd like £450 for this please. Shipping will be under £20 with UPS and it will be very well packed.